• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help with these codes

  • Thread starter Thread starter MadRed92GT
  • Start date Start date Feb 13, 2006
M

MadRed92GT

Founding Member
Oct 22, 2001
104
0
16
Jackson Tennessee
Feb 13, 2006
#1
  • Feb 13, 2006
  • #1
I know there have been many threads on codes but I need help with these. #15-Read Only Memory test failed #32-EGR valve not seated,EVP voltage low (sonic) or EPT circuit voltage low (PFE). These codes were KOEO. I wonder if the #15 code have anything to with the Hypertech chip that is installed on the computer.
 
M

MadRed92GT

Founding Member
Oct 22, 2001
104
0
16
Jackson Tennessee
Feb 23, 2006
#2
  • Feb 23, 2006
  • #2
anyone?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 23, 2006
#3
  • Feb 23, 2006
  • #3
Code 15 - No Keep Alive Memory power to PCM pin 1 or bad PCM (Memory Test Failure). The voltage to the Keep Alive Memory (KAM) is missing (wiring problem) or the KAM is bad. The KAM holds all of the settings that the computer "learns" as it operates and all the stored error codes that are generated as a result of something malfunctioning while the engine is running. Use a voltmeter to check the voltage to the pin 1 on the computer - you should always have 12 volts. No constant 12 volts = bad wiring. If you do always have the 12 volts, then the KAM is bad and the computer is faulty.

Wiring diagrams for the proper model years are next…

For 86 models see http://www.autozone.com/images/cds/gif/large/0900823d80167158.gif

For 87 models see http://www.autozone.com/images/cds/gif/large/0900823d8016715e.gif

For 88 models see http://www.autozone.com/images/cds/gif/large/0900823d80167162.gif

For 89-90 models see http://www.autozone.com/images/cds/gif/large/0900823d8019595f.gif

For 91-93 models see http://www.autozone.com/images/cds/gif/large/0900823d80195960.gif

CODE: 32 (KOEO) - EVP circuit below minimum voltage. Vref missing or broken wire or bad contact in circuit. Check for 5 volts on the orange/white wire. With the sensor removed from the EGR and still connected, press the plunger and watch the voltage change on the brown/lt green wire. Check for the same results on pin 27 on the computer. Check for continuity between the wiring at the sensor and the computer. The brown/lt green wire on the sensor & pin 27 should be less than 1 ohm. The black/white wire on the sensor & pin 46 should be less than 1 ohm. The orange/white wire on the sensor & pin 26 should be less than 1 ohm.

Remove the add on chip & re-run the tests. If the code 15 is still there, you have a computer or wiring problem. If not, the add on chip is the problem.
 
You must log in or register to reply here.

Similar threads

2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
469
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
J
Thanks for the information on codes 31,34,44 and 94!
  • JK86LX50
  • Mar 5, 2025
  • The Welcome Wagon
Replies
3
Views
378
The Welcome Wagon Aug 5, 2025
gkomo
M
Progress Thread 1993 Ford Mustang 5.0 convertible stock manual - ODB Codes shows running lean
  • mcalvo
  • Feb 11, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
2K
Fox 5.0 Mustang Tech Feb 22, 2025
AeroCoupe
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
619
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Engine Ran my code reader and
  • Mindseye007
  • Aug 10, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
705
Fox 5.0 Mustang Tech Aug 19, 2024
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?