Hey guys

Lambostang · Feb 22, 2006

Just an into for you guys so you can get to know me. I am Jeremy. I got a 1998 V6 with gears, intake, duels, and chip. Nothing really powerfull. I got Saleen front and back bumpers ( side skirts are on order ), Black Widow Drag wing, Cobra R Hood. 1 piece black housing projector headlights, and them stupid looking chrome tailights . Shaved door handles, key holes, badges, and antanna. 18X9in TT2 wheels, 2.25in drop. 1 12in speaker nothing too loud. 3 paint colors, kinda like a Cobalt blue on top with a Silver on bottom with a burnt orange in between. Starts at about 1/4 inch at the middle of the headlight and goes up to 4inch just in front of the taillights and wraps up to 1/4 at the taillight. Int use to be tan and black but I replaced it in full tweed. Same colors as the outside just the blue and Silver are fliped. Anyway I dont know how to post pics and dont know if I can with this being my first post.

zincyellow03 · Feb 22, 2006

Hey welcome to the board. Inorder to post pictures, get an account on photobucket.com and load them up there. Then they're give your pictures an link that says something like [IMAGE] BLAH BLAH [/IMAGE] Just that take that and past it in here and your done!

Lambostang · Feb 22, 2006

I had an account just didn't know if I need a "magic" number of post before I could put up pics.

View attachment 486106

View attachment 486108

View attachment 486110

This is what I started with

View attachment 486112

silver_sn95_v6 · Feb 22, 2006

sweeeeet stangg

zincyellow03 · Feb 22, 2006

Nice, Did you do that all yourself? How much did it cost? What are you going to do next to her?

Lambostang · Feb 22, 2006

No this has been a BIG group effort. I did the inside with help from the Prez of my car club. The lambos and shaved I helped with. Paint was done by a guy who used to paint 18 wheels cabs. As for whats next who is to say. There are 2 things I want. A Cobra R front and air ride. So why not both lol. I figured I was going to get alot of "ricestang" comments.

zincyellow03 · Feb 22, 2006

What are you going to do to the engine?

silver_sn95_v6 · Feb 22, 2006

why are the inner door panels missing?

zincyellow03 · Feb 22, 2006

silver_sn95_v6 said:
why are the inner door panels missing?

That was probably when he first got the lambos on.

silver_sn95_v6 · Feb 22, 2006

and painted?

zincyellow03 · Feb 22, 2006

All I see is that the door is painted the original color of the car and it looks like it has a white/gray insulation or something on it.

Tru_Blue_104 · Feb 23, 2006

Nice ride! Never seen anyone with those lambo doors on a stang. Really cool!

OxMox · Feb 23, 2006

wow, that actually looks good i'd put some saleen wheels on it or 03/04 cobra wheels but other than that it looks good

AP1995V6 · Feb 23, 2006

How heavy are the doors to lift up? Is it fairly effortless or does it require arm strength?

Lambostang · Feb 23, 2006

Not hard to lift up at all. Just took somthing thinking of where and what sides to mount the shocks on to make it easiest. Door panels are missing cuz I just haven't had the time to start putting the interior back together and we wanted the stripes going inside the doors so we took them out. Had to be recovered anyway. I am actualy looking for a set of 03 Cobra wheels but I got 18's now and dont want anything smaller.

I just finished my doors and this is what I came up with. Kinda Rice like but till I can get it fiberglassed it will have to work.

View attachment 485977

AP1995V6 · Feb 23, 2006

Definitely going to be a killer show car. Does the paint on the doors match up with the car? The blue and silver look alot lighter on the door.

I've thought about getting the lambo doors somewhere on down the line, and I was worried about the doors being a bitch to lift or something that I would get tired of quickly.

My car has enough show parts now. It's time for some go fast mods, and then maybe I'll think about the doors

My Saleen side skirts were on back order for about 3-4 months. I order my kit around September and got the whole ground effects kit in around December. Something was wrong with their mold so they had an inspection and all that jazz. (This was all coming straight from Saleen.)

I'm getting the Cobra R front brake kit from Steeda in a week or so. I would like to get the 14"/6 piston kit, but I don't think I want to swing $3k for just front brakes. Bigger rotors would killer with the 18" rims. I'm sure I'll post pictures of mine (I have 18" Steeda Ultra-lites) whenever I get them installed hopefully during Spring Break.

Anyway, keep us posted. It's nice to see people around the boards that spend their life savings on their car

zincyellow03 · Feb 23, 2006

AP, how much are the breaks going to cost you?

AP1995V6 · Feb 23, 2006

$1,100 for the front if I get PS rotors.

When I get the rears, I'm not going to get anything fancy. Maybe Cobra rears or something.

AP1995V6 · Feb 24, 2006

:OT:

No big brakes for the spring. I got my 351 block back from the engine shop so I'm going to focus on putting it together.

OxMox · Feb 24, 2006

351 w/ a procharger would KILL!!!

Hey guys

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

turkeysammichesonhisface

Member

New Member

Member

New Member

Member

Member

turkeysammichesonhisface

Similar threads

Privacy & Transparency

Privacy & Transparency