• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

High rpm revs when depressing clutch

  • Thread starter Thread starter Methodical
  • Start date Start date Jul 27, 2006

Methodical

15 Year Member
Dec 1, 2003
1,192
11
59
Clinton, MD
Jul 27, 2006
#1
  • Jul 27, 2006
  • #1
I have a 94 Ranger (5 speed). The other day I was about to drive it and noticed that whenever I depressed the clutch and let off it would rev up to about 3k rpms. I hadn't driven it in a few weeks but prior to that there were no problems - as a matter of fact, I ran a scan and checked for codes about the last time I drove it and all was well . What could be the problem?

I plan to run a scan and check for any codes but thought I get some possibilities.

Thanks
 
F

fordtech28

Member
May 12, 2006
312
0
17
Riverside Cali.
Jul 27, 2006
#2
  • Jul 27, 2006
  • #2
sounds like you have a massive vacuum leak or your idle control motor is taking a dump try cleaning it first and check for vacuum leaks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 27, 2006
#3
  • Jul 27, 2006
  • #3
Does the ranger use a NSS in the trans?

If so, Fordtech might be onto something with the IAC.

Good luck Al.
 

Methodical

15 Year Member
Dec 1, 2003
1,192
11
59
Clinton, MD
Jul 28, 2006
#4
  • Jul 28, 2006
  • #4
I will check hopefully today.

Thanks
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Jul 28, 2006
#5
  • Jul 28, 2006
  • #5
i'd take a look at the IAC. if you disconnect it, you'll notice that the rpms don't hang between shifts.

also, if it's a little off/not working properly, you'll notice that the rpms will shoot up and hang for quite a bit before dropping.
 

Methodical

15 Year Member
Dec 1, 2003
1,192
11
59
Clinton, MD
Jul 29, 2006
#6
  • Jul 29, 2006
  • #6
Update:

I ran the scan - both KOEO and KOER - and it checked out ok. So I performed the normal diagnostics of the IAC and cleaned it and it checked out ok. Then I began messing with the accelarator cable and bracket and discovered that the accelerator bracket and or the accelerator cable is sticking. The bracket spring tensioners that returns the cable to it's normal position is hanging open and slowly returns to the closed position.

I called the dealership and they want $114 just for the accelerator cable, but they discontinued the bracket. I've called a couple of other local parts store and no dice. I know I can go to the salvage yard and possibly find what I need, but as an alternative to a used piece, does anyone know where I can get a new accelarator bracket assembly and cable?

Again. Thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 29, 2006
#7
  • Jul 29, 2006
  • #7
I cant help since I have no clue what the assembly looks like. But for a short term fix (till you source parts), could you install a return spring (a la carbed stuff) on the throttleshaft bellhousing?

Good luck Al.
 
You must log in or register to reply here.

Similar threads

K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
351
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
320
SVT Tech Forum Nov 20, 2025
nickyb
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
724
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
922
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
393
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?