Hood clearance issues

T

TurboJoeD.

New Member

Nov 8, 2007

33

0

0

Feb 4, 2008

#1

• Feb 4, 2008

• #1

I have a 92 coupe that I have been putting together, and I would like to keep my freshly painted stock hood. I have tall valve covers, so I am using a 1/2" spacer on my GT40 intake. I got everything together and went to put the hood on and it doesn't go. I've done a search and can't tell if this is normal or not. Well, in conclusion I don't think it is abnormal. I have brand new motor mounts. I don't know if they are vert or not+some say that they don't really even lower the motor. I just went to O'reily and got 92 mustang motor mounts--according to some: they are all the same after 1990 anyway?
If I don't already have vert mounts and I get some what difference can I expect? And are there any other options that I should know about?
What should I do?
Thanks

 

Funanin

Founding Member

Nov 26, 2001

356

0

0

Horsham, Pennsylvania

Feb 4, 2008

#2

• Feb 4, 2008

• #2

the only thing you can do, is either buy a cowl hood, OR, you will have to just remove the tall valve covers. regular height covers will work fine with almost any rockers if you remove the oil baffles in them. Then just take ur 1/2" spacer out and it should close fine

 

ttop88

Member

Mar 12, 2007

42

0

6

indiana

Feb 4, 2008

#3

• Feb 4, 2008

• #3

Or you could cut the reinforcment bars out of the hood. That is where it is hitting isnt it?

 

Funanin

Founding Member

Nov 26, 2001

356

0

0

Horsham, Pennsylvania

Feb 4, 2008

#4

• Feb 4, 2008

• #4

i wouldnt do that but thats just me. plus i dont know what state u guys are from but if there are no reinforcements on the hood it might not pass inspection because of safety

 

MrXCESSIVESPEED

Member

Mar 10, 2002

0

1

6

Maryland

Feb 4, 2008

#5

• Feb 4, 2008

• #5

Id put stock height valve covers back on.....

not to mention the 1/2" spacer is hurting your perfomance by making the long intake runners that much longer.

 

T

TurboJoeD.

New Member

Nov 8, 2007

33

0

0

Feb 4, 2008

#6

• Feb 4, 2008

• #6

Well, I am kind of set on the valve covers for a couple of different reasons. So, I may end up with a cowl. I have kind of regreted not getting one before I painted it anyway. Maybe I will just put the stock valve covers on there for now. But, is that a no to the convertible mounts? That wouldn't possibly help?

 

Funanin

Founding Member

Nov 26, 2001

356

0

0

Horsham, Pennsylvania

Feb 4, 2008

#7

• Feb 4, 2008

• #7

yea i have never heard of vert mounts being lower but u could look into it and see if there possibly are any aftermarket ones, thing is, if u lower the engine anymore than it already is, the oil pan will most likely touch the K member.

 

T

TurboJoeD.

New Member

Nov 8, 2007

33

0

0

Feb 5, 2008

#8

• Feb 5, 2008

• #8

I found this:

http://www.fordmuscle.com/forums/mustang-pages-1979-1995/467476-convertible-motor-mounts.html

It says that they drop the motor .75". I have also read that they are shorter on this board. But, I've also read on this board that that is a myth. So, if somebody knows for sure--please chime in. Otherwise, I guess I'm gonna get some and see.
I will post though what I find, but I'm sure somebody on here has done this.

 

T

TurboJoeD.

New Member

Nov 8, 2007

33

0

0

Feb 6, 2008

#9

• Feb 6, 2008

• #9

anybody?

 

cenok is family

15 Year Member

Jun 25, 2003

1,409

69

79

Norman, Ok

Feb 6, 2008

#10

• Feb 6, 2008

• #10

BOTH vert mounts and ENERGY SUSPENSION mounts, will lower your motor about .5". iirc, prothane mounts won't though.

here's a normal mustang V8 mounts:

these are what convertible mounts look like:


these are what the Energy Suspension mounts look like (tranny mount on bottom):


energy suspension and prothane mounts are the same design as vert mounts, but iirc, the prothane mounts are a little thicker and won't lower your motor. there was a big thread about this some months back and somebody actually took side by side pics and did comparisons. i had vert mounts in my old coupe and i remember it did lower the engine in reference to the MAP sensor.

hope this helps, good luck

 

faststang90

10 Year Member

Nov 5, 2007

522

16

49

baytown texas

Feb 6, 2008

#11

• Feb 6, 2008

• #11

ford dealer

our ford dealer sold the conv. i had a set i will look for them. our ford dealer was tommie vaugh ford in houston its a svo sealer u may have to call them and seel if they have them

 

T

TurboJoeD.

New Member

Nov 8, 2007

33

0

0

Feb 7, 2008

#12

• Feb 7, 2008

• #12

Yeah, that helps. But I am still a little confused, because I don't see how the second picture could possibly be shorter than the first picture. The mounts that are on the car look like the second picture. So if I have already lowered the motor .5", then should it be hitting the hood with my combo of just a gt40 and .5" spacer. It just doesn't seem right to me-I don't know. I ordered both sets at O'reily so that I can compare them in hand.