• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How bad is this??

  • Thread starter Thread starter asecretfile
  • Start date Start date Apr 18, 2008

asecretfile

New Member
Feb 11, 2007
228
0
0
Apr 18, 2008
#1
  • Apr 18, 2008
  • #1
Finished installing my new upper and lower on my 87GT. Have not started the car yet the whole time...but read it is best to change the oil after this swap...and when I was draining the old oil about a cup or 2 of coolant came out, then changed straight to oil. One thing I didnt do is drain the coolant before I did the swap, just siphoned a little out of the top where it was puddling so my gasket wasnt going on wet. Remember I havent even so much as turned the key over during this time, and still havent

is a little coolant coming out of the pan terrible news or could it have been from when I took the old upper off and a little leaked in?

thanks
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Apr 18, 2008
#2
  • Apr 18, 2008
  • #2
It's probably from the lower intake. When you first start it, keep an eye on the coolant and oil to see if either of them appear to be mixing.
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Apr 18, 2008
#3
  • Apr 18, 2008
  • #3
StangGT1995 said:
It's probably from the lower intake. When you first start it, keep an eye on the coolant and oil to see if either of them appear to be mixing.
Click to expand...

so you think maybe from when I took the old lower off while the coolant level was still full it might have leaked in then? I mean its still almost full now....I only siphoned out maybe 40 oz of it during the install

I took my time and was very careful when placing the gaskets and lower and the torquing sequence

thanks for replying
 

Fast63

New Member
Sep 20, 2007
717
0
0
Apr 19, 2008
#4
  • Apr 19, 2008
  • #4
yeah I think it happened when you took the intake off, but do keep an eye on it
 
You must log in or register to reply here.

Similar threads

Block draining
  • JD1964
  • Mar 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
173
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 27, 2026
JD1964
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
713
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
X
Engine 5.0 Head Gaskets installed wrong block coolant passages???
  • Xam Sirrah
  • Jul 21, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
952
Fox 5.0 Mustang Tech Dec 22, 2025
Qtrhrse23
K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
228
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?