How do I "energize the fuel pump" on a Fox?

[CMPRacing302]

Need to volume test the fuel pump on my 92 GT. I need to make the fuel pump run while the car isn't running. I haven't dealt with the electrical system yet, so I'm not sure how to do this.
Has anyone done this?
thanks

 

[HISSIN50]

See here to jump the fuel pump circuit so it primes indefinitely.

 

[jrichker]

Just in case the link doesn't work...

To trick the fuel pump into running, find the ECC test connector and jump the connector in the lower RH corner
to ground.

 

[CMPRacing302]

thanks, guys!

 

[bynummustang]

Turn the key to "on" :shrugh:, but dont' start it.

 

[HISSIN50]

Turn the key to "on" :shrugh:, but dont' start it.

The pump only runs for about 3-5 seconds during the prime-out, which is not enough time to do a volume test.

 

[CMPRacing302]

Turn the key to "on" :shrugh:, but dont' start it.

yeah. i do that every time i start him to make sure the pump sounds happy. doesn't stay running near long enough for a volume test.

 

[bynummustang]

I must have a poorly wired system then.... now I want to go back and check it.