• Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech

How do I remove my windshield wiper arms?

  • Thread starter Thread starter 1badII
  • Start date Start date Jul 1, 2006
1

1badII

Member
Aug 5, 2003
796
0
16
Durham, North Cacalaky
Jul 1, 2006
#1
  • Jul 1, 2006
  • #1
The repair manual says to lift the arm away from the windshield and press the little spring clip, and the arm will lift off. I've pushed and pulled the clip every which way, and I still can't get the bitches off! What am I donig wrong? I'm about to take the dremel to it!
 
M

mustangmods

Member
Oct 25, 2005
49
1
8
Jul 1, 2006
#2
  • Jul 1, 2006
  • #2
Ya, thats the way. The tab should pull out about 1/4 inch. But if they are anything like mine which had not been touched in 20 years, they aren't going to just fall off.Once you get the tab out just keep working the wiper back and forth and it will let go. Some WD40 will help.
 
1

1badII

Member
Aug 5, 2003
796
0
16
Durham, North Cacalaky
Jul 1, 2006
#3
  • Jul 1, 2006
  • #3
I'm pushing the clip in, and the arm will move just a little bit up and down, like something is still holding it down.
 

Power Surge

Founding Member
Jul 20, 2002
1,516
4
38
Palm Coast, FL
Jul 2, 2006
#4
  • Jul 2, 2006
  • #4
You need to pull up on the arm so it's at a slight upward angle, and then you need to pull the tab on the side of the base OUTWARD. You might want to use a small flat blade screwdriver to pop the tab. Then the arm pops off.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jul 2, 2006
#5
  • Jul 2, 2006
  • #5
Look at the tab on the arm closely, figure it out
 
1

1badII

Member
Aug 5, 2003
796
0
16
Durham, North Cacalaky
Jul 3, 2006
#6
  • Jul 3, 2006
  • #6
McTeague said:
Look at the tab on the arm closely, figure it out
Click to expand...
I can't lift the arm up high enough to see underneath good enough to tell how it all works. There isn't a tab that pulls out from the side.
 

2muchtime

Founding Member
Jan 30, 2002
890
1
16
MA.
Jul 6, 2006
#7
  • Jul 6, 2006
  • #7
it pulls out ... towards the blade itself... a sm. screwdriver works
(not standard size) pry it away from the right side of the shaft..
 
You must log in or register to reply here.

Similar threads

A definitive answer to the question of how much height Energy Suspension isolators add
  • 2000xp8
  • May 20, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
262
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2025
2000xp8
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
459
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?