How do you fix the most tedious things? Look inside and see if U can help!

H

Highbredcloud

Active Member

Mar 4, 2003

1,075

1

36

Palos Hills, IL

Dec 29, 2003

#1

• Dec 29, 2003

• #1

Guys...as some of you might be aware of, I purchased a 91 LX 5.0 as my daily driver. Like most Mustangs things break or just need to be replaced. Below is a list of things that don't work on my car. See if you can help.

1. Hatch rattles- Do I need a whole new hatch or just the lock?
2. My defrost doesn't work- Is there a fuse I need to check? or do I have to replace the wires on the glass?
3. Power locks are making weird noises (not like they should, still work though)...New motor?
4. Power mirrors are not working...Is the switch bad? or a fuse?
5. Barely any heat in the car- I think it's the heater core
6. When my parking break is on the light doesn't light up on the cluster...Don't know if any of the other ligths such as "check engeine" etc...work. Any advice?
7. Driving lighs flicker on and off sometimes when I dirve at night...really annoying...is a fuse or the switch.

These are porbably the most common things that go bad in a Mustang and for those of you that fixed any of the following please share. Indicate the number in your answer so I know which you are talking about.

thanks,

-Greg

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,258

17,941

224

Massachusetts

Dec 29, 2003

#2

• Dec 29, 2003

• #2

Highbredcloud said:

1. Hatch rattles- Do I need a whole new hatch or just the lock?
2. My defrost doesn't work- Is there a fuse I need to check? or do I have to replace the wires on the glass?
3. Power locks are making weird noises (not like they should, still work though)...New motor?
4. Power mirrors are not working...Is the switch bad? or a fuse?
5. Barely any heat in the car- I think it's the heater core
6. When my parking break is on the light doesn't light up on the cluster...Don't know if any of the other ligths such as "check engeine" etc...work. Any advice?
7. Driving lighs flicker on and off sometimes when I dirve at night...really annoying...is a fuse or the switch.

Click to expand...

#1. You can just replace the latch striker and go from there. Also, check to see if the rubber bumps on the outer edges are missin or worn. Replace if necessary

#2, check fuse first, then check for physical breaks in the lines. If you have a good digital tester, test for continuity across the grid. Does the little yellow light come on when you hit the defroster button?

#3 new lock actuators...common prob when they are about to croak

#4 check fuse first, then possible switch. Good tester would come in handy here

#5 does the heater blend door move?

#6 probably a burned out bulb. When you turn the car from off to ON, ALL the lights in the cluster should come on except the BRAKE light. that you test by pulling up on the brake. Also, it could be a bad switch at the bottom of the e0brake, but bulb would make more sense

#7, common prob, usually because of the switch

 

S

StangBangRicers

New Member

Dec 9, 2002

58

0

0

Dec 29, 2003

#3

• Dec 29, 2003

• #3

7. Driving lighs flicker on and off sometimes when I dirve at night...really annoying...is a fuse or the switch.


I had a dim headlight that was causing this... since replacing it has never done it again. (about 4 years now)

It sucked too because people would get really annoyed with me or pull over thinking I was telling them they have a problem with their car.

 

C

Cabige

New Member

Dec 26, 2003

14

0

0

Dec 29, 2003

#4

• Dec 29, 2003

• #4

My technical mastery on the fox body mustangs has led me to a remedy for your first problem....

That happened to me so I shoved a few shop rags under the hatch.

 

IndyBlk5.0

New Member

Nov 24, 2003

1,122

1

0

New Whiteland, IN

Dec 29, 2003

#5

• Dec 29, 2003

• #5

1.. just rap the damn hatch latch (bar) with black eletrical tape, works like a charm, wd-40 works like a charm...
its a mustang, its going to have these things wrong with it, dont fret

 

H

Highbredcloud

Active Member

Mar 4, 2003

1,075

1

36

Palos Hills, IL

Dec 29, 2003

#6

• Dec 29, 2003

• #6

...thanks for the suggestions, however, I am not going to "rig" something by using tape to fix it. Tape does not fix all. I know its a Mustang and I'm very anal...so I guess you could see my dilema.

 

R

redterror302

Founding Member

Jun 29, 2002

895

0

0

Mertztown, PA or State College, PA

Dec 29, 2003

#7

• Dec 29, 2003

• #7

My hatch also squeeks. It also has gotten progressively harder to close the thing. I am just about slamming the thing these days to get it latched. What would need to be replaced or fixed for this situation?

Chris

ps-sorry for jacking your thread, I just had a similar question.

 

H

Highbredcloud

Active Member

Mar 4, 2003

1,075

1

36

Palos Hills, IL

Dec 29, 2003

#8

• Dec 29, 2003

• #8

5.0GT said:

ps-sorry for jacking your thread, I just had a similar question.

Click to expand...

Don't worry about it. This thread is meant to help everyone with similar problems along with my self. Any contributions that are legit are more than welcome.

 

RyanSG

Founding Member

Oct 24, 2002

286

0

17

Allentown, Pa

Dec 29, 2003

#9

• Dec 29, 2003

• #9

when ever you find out what you need, go to www.50resto.com they have everythign you need for really good proces, i get all my misc parts there from bolts to door lock motors, seals, everything you'll need they prob will have it.

 

90 lx convert

Stanger

Founding Member

Aug 13, 1999

926

1

18

Falling Waters Wv.

Dec 30, 2003

#10

• Dec 30, 2003

• #10

Most of these solutions are right on for these problems. The heat and defrost problem could be vacuum related. The doors that direct the air one way or the other are moved by vacuum. The solution for the hatch is new rubber gasket, new rubber bumbers and adjust after you replace them. Mike

 

mustang90

Founding Member

Feb 8, 2001

1,209

15

58

Dec 31, 2003

#11

• Dec 31, 2003

• #11

check the headlight grounds on the radiator support. sounds like they may be dirty or rusted, if so remove the two 10mm bolts and clean the conections.

 

IndyBlk5.0

New Member

Nov 24, 2003

1,122

1

0

New Whiteland, IN

Dec 31, 2003

#12

• Dec 31, 2003

• #12

i offered you a temporary fix for the problem. i know rattling hatch drives people insane. do it until you get the parts that you need. thats all that i meant by the tape, it acts as a cusion for the latch. and for you power mirrors problem, my switch was fried, try taking it out and taking it somewhere to get it tested. These switches are kindof expensive though good luck

 

remat457

Founding Member

Aug 7, 2002

587

0

16

Seattle/Tacoma

Dec 31, 2003

#13

• Dec 31, 2003

• #13

"4. Power mirrors are not working...Is the switch bad? or a fuse?"

Mine ended up being the switch. I got a replacement on Ebay for $10..if I remember right dealer wanted something like $50...

Good luck!