Anyone have a secret way to get the condensation out? I took the bulb out and let the car sit to air the lens out, but it's still covered with water. Any advice?
How do you get the condensation out of my headlight lens!!!
- Thread starter reeber
- Start date
they are brand new!! They are not sealed though.. I have the Black Beauty's made by 5.0 Resto... Not the stock ones.. There has to be a way to get that water out.. The other one is fine?!
i had this problem with my projector lights. I took them out and turned them upside down, then hair dryer for a little. I had to run a small bead of clear silicone around the entire light assembly to seal it properly. No more leaks or condensation after the silicone.
1. blow dryer in the bulb insert
2. move to Phoenix to heat it up while open
3. get new light housings
2. move to Phoenix to heat it up while open
3. get new light housings
Sick96Stang
New Member
I'll buy my plane ticket tonight... That has to be the best way to take care of the condensation... I should have thought of that.. I believe the condensation was already in the lens when I installed it. Unfortunately, it's humid as all hell here and was in the middle of a thunderstorm while installing the headlights. Once sealed after the bulb was put in, I believe it trapped a good bit of moisture in the housing. I guess I have to remove the light and dry it out. I was hoping there was a way to take care of that without removing the light.
90RanGer
New Member
When mine had condensation inside all I did was take the bulb out and open the hood and let nature do the work.
