• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How do you install a power pipe?

  • Thread starter Thread starter mustangfan1990
  • Start date Start date Feb 20, 2008

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 20, 2008
#1
  • Feb 20, 2008
  • #1
I have the UPR power pipe and I am not sure to install it. Can anyone help me out here or show me a link where there are pics on how to install. I am currently installing a vortech SQ s trim on my mustang. I am taking pics every step of the way to post so ANYONE that has questions on how to install anything they can look at these pics, but I need to know if anyone can show me how to install a power pipe. there isnt much room there for that 4 inch pipe
 
B

Big Top GT

New Member
Mar 4, 2002
68
0
0
Coral Springs, Fl ! 33071
Feb 20, 2008
#2
  • Feb 20, 2008
  • #2
Well, the first thing I'd say is if you don't fully understand how to install a power pipe, you might want to rethink installing the blower.

Installing the power pipe should be a pretty straight-forward "nut and bolt" operation.

If you're running a 4" pipe, though, you may have to trim the fender apron to give it enough room to get through.

I've got one, but it's not the same setup as you, since I have a twin turbo setup. If it were similar I'd post pics for you.

If you post up some pictures of what you have we'll better be able to help you.
 

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 20, 2008
#3
  • Feb 20, 2008
  • #3
uhh well the SC has a manual on how to install a sc. The SC is already installed bud. I know how to work on a car. I have never seen how a power pippe is install cause I never really looked for it. I have seen plenty of SC setups on a 5.0 mustang but never looked for the power pipe.
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Feb 20, 2008
#4
  • Feb 20, 2008
  • #4


the non-dryer hose going into the fender apron. you will need to keep test fitting and cutting
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Feb 20, 2008
#5
  • Feb 20, 2008
  • #5
also here is a write up

http://www.andersonfordmotorsport.com/media/take.htm
 
S

Silvers

New Member
Jan 4, 2007
51
0
0
Feb 20, 2008
#6
  • Feb 20, 2008
  • #6
Before you commit to the install make sure the rubber elbow fits your SC and the rubber reducer fits your mass air. I had some problems with both.
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Feb 20, 2008
#7
  • Feb 20, 2008
  • #7
Yea, just look at the instructions on andersons site. Thats what I used and it came out perfect.
 
You must log in or register to reply here.

Similar threads

4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
127
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
166
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
289
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
485
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?