• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How does this combo sound?

  • Thread starter Thread starter Blown95Cobra
  • Start date Start date Jun 5, 2006
B

Blown95Cobra

Member
Jun 6, 2004
58
0
6
Spring Hill, FL
Jun 5, 2006
#1
  • Jun 5, 2006
  • #1
Here's what I think I'm going to run on my 5.0: TFS Stage 1 cam (.499"/.510" lift, 275*/279*adv duration), Performer intake, Edelbrock 600cfm carb, and GT40P heads. Does that seem like a good combo?

Thanks,
Frankie
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 5, 2006
#2
  • Jun 5, 2006
  • #2
sounds like a good set up.
 

bryce93lx

Member
Jan 20, 2006
88
1
19
Luke AFB AZ
Jun 5, 2006
#3
  • Jun 5, 2006
  • #3
if you are gettin the heads junkyard thats's great but if you are buying them off the shelf there are alot of better ways to go, remember you will need all the associated intake parts mas air throttle body injectors and a new fuel pump, if not already installed
 

mattmcdan

Member
Apr 19, 2006
176
0
19
Okeechobee, Florida
Jun 5, 2006
#4
  • Jun 5, 2006
  • #4
bryce93lx said:
if you are gettin the heads junkyard thats's great but if you are buying them off the shelf there are alot of better ways to go, remember you will need all the associated intake parts mas air throttle body injectors and a new fuel pump, if not already installed
Click to expand...


I think he's running a carb, hence the 600 edelbrock.. but anyhow Edelbrock sucks for performance, Holley is the way to go.
 
B

Blown95Cobra

Member
Jun 6, 2004
58
0
6
Spring Hill, FL
Jun 5, 2006
#5
  • Jun 5, 2006
  • #5
bryce93lx said:
if you are gettin the heads junkyard thats's great but if you are buying them off the shelf there are alot of better ways to go, remember you will need all the associated intake parts mas air throttle body injectors and a new fuel pump, if not already installed
Click to expand...

I'm going to ge the heads from a junkyard and I am going carb.

mattmcdan said:
I think he's running a carb, hence the 600 edelbrock.. but anyhow Edelbrock sucks for performance, Holley is the way to go.
Click to expand...

I got a good deal on the carb and manifold. I'm not looking for the most power. I just want to get the car done so I can do HUGE burnouts and run at the track
 

Tonys96Cobra

professional deer "mounter"
Oct 28, 2005
19
9
29
Syracuse
Jun 5, 2006
#6
  • Jun 5, 2006
  • #6
bryce93lx said:
if you are gettin the heads junkyard thats's great but if you are buying them off the shelf there are alot of better ways to go, remember you will need all the associated intake parts mas air throttle body injectors and a new fuel pump, if not already installed
Click to expand...
Since when are Gt40p heads not worth any money? And if they arent worth anything, why would they require bigger fuel pump/maf and injectors. That would only be required for heads that make considerably more power. Fact is, p heads are a very solid upgrade from stock. Its already been pointed out that hes going carb. So mr 95 blown cobra, I think your looking at a nice setup, Holley would be my choice for a carb, but thats only because I am more familiar with them. So rock on!
 
B

Blown95Cobra

Member
Jun 6, 2004
58
0
6
Spring Hill, FL
Jun 6, 2006
#7
  • Jun 6, 2006
  • #7
Thanks for the input guys. I wanted to make sure the heads, cam, and intake would be good together
 

bryce93lx

Member
Jan 20, 2006
88
1
19
Luke AFB AZ
Jun 6, 2006
#8
  • Jun 6, 2006
  • #8
sorry i can't read, but yeah like i said out of the junkyard gt-40 are great but if you are buying retail thier are better ways to go, he did not say how he was getting them, sorry i wasn't paying attention, had i saw the carb part i would not have posted cuase i don't know squat about those, looks like it will be a good cheap setup alot of folks run that cam
 
You must log in or register to reply here.

Similar threads

N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
347
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
M
My numbers sound right?
  • MiltP
  • Feb 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
28
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Apr 2, 2026
MiltP
M
K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
406
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
T
Resolved No run or idle
  • Thebluefox1
  • Oct 10, 2025
  • Fox 5.0 Mustang Tech
Replies
14
Views
660
Fox 5.0 Mustang Tech Nov 25, 2025
DadLife0724
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?