Just wanted to know if it's an easy job or should I bring my car in to get it done? I have a week off soon so I will have the time but I never did that before. How does it compare to a upper+lower intake job?
How hard is it to change the lower control arms?
- Thread starter DoctorB712
- Start date
94-302-vert
Active Member
Not bad to do at all. Just takes some time. I want to say I did mine in about 2-3 hours including jacking up the car and everything. Hard for me to give a time as I was changing the bushings in teh stock arms and I had to remove the rear brakes in order get the lower bolts out of the control arms. I also installed my c-springs at the same time.
SN95StangMan
New Member
94-302-vert said:
I did it for the first time in about 4 hours while taking my time making sure i didnt F anything up. i didnt have to remove the brakes though. 
DougNuts
Founding Member
The hardest part is getting the axle side LCA bolts out after they've rusted themselves into the bushing sleeves. Other than that, it's a couple hour job.
Subscribing, since I want to do this...I got a friend with all the mechanic's tools/fittings/adapter/etc, and his dad owns a garage, and he just got a stang, so he's eager to come and help me out.
RC
RC
Similar threads
