• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

How much horsepower?

  • Thread starter Thread starter cdiehl30
  • Start date Start date Nov 8, 2007
C

cdiehl30

New Member
Oct 31, 2007
16
0
0
Nov 8, 2007
#1
  • Nov 8, 2007
  • #1
I am finally getting close to being done with my setup. I have an 88 gt that I have been working on. I am not sure if I went the right way about everything but it was my first time doing it and we all have to start somewhere. My combination cosists of a 347 stroker kit, gt40x303 heads, f303 cam, bbk ssi intake and throttle body, bbk longtube headers, bbk underdrive pulleys, bbk cold air intake, ac eliminator kit, 373 gears, and a 175 wet shot of nitrous. Without that nitrous, how much horsepower do yall think I will put out? Does anyone have close to the same setup? With the nitrous how much possible hp could the car make to the rear wheels?
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 8, 2007
#2
  • Nov 8, 2007
  • #2
I will say about 350/370 to the flywheel on motor and with the creative juices flowing over 500 to the flywheel. As far as the SOTP dyno its gonna pull hard on the sauce you'll love it!
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Nov 8, 2007
#3
  • Nov 8, 2007
  • #3
Idk about that much to the wheels. We have a local "hero" with a 331 and a TFS kit who with a good tune put down 315 to the tire. Granted we have a GT40P stock cammed street car that tossed down 300, but without head work, I think 320-330 would be more reasonable.
 

Trbofox

Member
Oct 26, 2004
227
18
19
Erie,Pa.
Nov 8, 2007
#4
  • Nov 8, 2007
  • #4
On my 93 Cobra I did the Trick-Flow thing, bigger cam, headers, had Fox Lake work the heads and intake and I put down 315rwhp.
 

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..
Aug 8, 2006
60
0
6
Sandusky, Ohio ( Cedar Point - America's Rockin' R
Nov 8, 2007
#5
  • Nov 8, 2007
  • #5
With my TFS Trackheat with a Stage2 cam, 75mm T-body, 24lb injectors I put down 310 to the wheels. I'm an all stock bottom end.
 
C

cdiehl30

New Member
Oct 31, 2007
16
0
0
Nov 8, 2007
#6
  • Nov 8, 2007
  • #6
500 hp to the fly wheel

What would this be to the rear wheels?
 

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..
Aug 8, 2006
60
0
6
Sandusky, Ohio ( Cedar Point - America's Rockin' R
Nov 8, 2007
#7
  • Nov 8, 2007
  • #7
i'd guess 405ish... just a guess though
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 8, 2007
#8
  • Nov 8, 2007
  • #8
take about 20% off roughly for driveline sap as an estimate through a 5 speed
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,399
3,546
233
Nov 8, 2007
#9
  • Nov 8, 2007
  • #9
My friends 347 with AFR 185's, comp cam (not sure of specs), RPM II plenum, anderson power pipe and PMS and a compression ratio of 10:1 was putting down 329 rwhp through a T-5
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
140
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Y
BBK SSI Crossover tube
  • yaboity
  • May 17, 2025
  • 1994 - 1995 Specific Tech
Replies
19
Views
891
1994 - 1995 Specific Tech Jun 7, 2025
yaboity
Y
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
200
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
392
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?