M my orange-gt New Member Oct 10, 2004 17 0 0 illinois Oct 10, 2004 #1 Oct 10, 2004 #1 How much would it be to buy a shifter and have it installed exactly
Beau Founding Member Jan 29, 2000 3,050 0 0 San Diego Oct 10, 2004 #2 Oct 10, 2004 #2 check the partshopper on this site for pricing and you can do the installation yourself.
04Comp_Org_GT Member Feb 15, 2004 46 0 7 Terre Haute, IN Oct 10, 2004 #3 Oct 10, 2004 #3 It took me about 30 minutes to install my Tri ax. about 15 of it was getting the stocker off Its really easy and somewhere on this site is a write up.
It took me about 30 minutes to install my Tri ax. about 15 of it was getting the stocker off Its really easy and somewhere on this site is a write up.
M my orange-gt New Member Oct 10, 2004 17 0 0 illinois Oct 10, 2004 #4 Oct 10, 2004 #4 hey i have a comp orange too, 40th anniversary, 5spd , conv.
1low03gt 20+ Year Stangneter May 24, 2004 708 11 38 Cold Hell,Ontario,Canada!! Oct 10, 2004 #5 Oct 10, 2004 #5 You can do the install yourself.Very easy . On a scale of 1 to 10,(1 being hard,and 10 being simple),the install would be a 9.Save you some bucks . 9 94Gtstock-newclutch Founding Member Mar 22, 2000 849 0 0 Oct 10, 2004 #6 Oct 10, 2004 #6 just be careful when taking the shifter bezel off. if you break that little pos plastic tab you are in for a world of annoyance 01MachGT New Member Mar 20, 2004 104 0 0 Marshalltown, IA Oct 10, 2004 #7 Oct 10, 2004 #7 and I'd suggest some gloves in there, I cut the hell out of my hands on the plastic when I installed mine. 04DarkShadowGT Member Jan 31, 2004 474 0 17 Fort Wayne, IN Oct 10, 2004 #8 Oct 10, 2004 #8 If know what a socket is you can change the shifter. Piece of cake.
You can do the install yourself.Very easy . On a scale of 1 to 10,(1 being hard,and 10 being simple),the install would be a 9.Save you some bucks .
9 94Gtstock-newclutch Founding Member Mar 22, 2000 849 0 0 Oct 10, 2004 #6 Oct 10, 2004 #6 just be careful when taking the shifter bezel off. if you break that little pos plastic tab you are in for a world of annoyance
just be careful when taking the shifter bezel off. if you break that little pos plastic tab you are in for a world of annoyance
01MachGT New Member Mar 20, 2004 104 0 0 Marshalltown, IA Oct 10, 2004 #7 Oct 10, 2004 #7 and I'd suggest some gloves in there, I cut the hell out of my hands on the plastic when I installed mine.
and I'd suggest some gloves in there, I cut the hell out of my hands on the plastic when I installed mine.
04DarkShadowGT Member Jan 31, 2004 474 0 17 Fort Wayne, IN Oct 10, 2004 #8 Oct 10, 2004 #8 If know what a socket is you can change the shifter. Piece of cake.