1 - Remove the rear bench seat. There are no magic tabs here despite other write-ups. Starting on one side, push the bench seat up and in, and the seat will slide out of the retaining bracket. Repeat with the second side, it will be much easier. The bench will come out at this stage.
2 - Remove the the (2) bolts at the lower right and left corners of the exposed rear seat back. The rear seat back will now slide up and and out.
3 - Remove (4) phillips screws per side of the rear interior quarters. (2) are easily visible, (1) has now been exposed on the rear quarter side by removing the rear seat back, and you also have to remove (1) from the bottom of the door trim closest to the panel. The entire rear quarters should now lift up and out. Be careful of your window motors!
4 - Your rear speakers are attached behind the carpeting glued onto your rear quarters. You will have to remove (1) phillips head screw to free up the carpet. Peal the carpeting back and remove the (4) screws that are retaining your speaker.
If anyone has questions on this please PM me.
Adam
2 - Remove the the (2) bolts at the lower right and left corners of the exposed rear seat back. The rear seat back will now slide up and and out.
3 - Remove (4) phillips screws per side of the rear interior quarters. (2) are easily visible, (1) has now been exposed on the rear quarter side by removing the rear seat back, and you also have to remove (1) from the bottom of the door trim closest to the panel. The entire rear quarters should now lift up and out. Be careful of your window motors!
4 - Your rear speakers are attached behind the carpeting glued onto your rear quarters. You will have to remove (1) phillips head screw to free up the carpet. Peal the carpeting back and remove the (4) screws that are retaining your speaker.
If anyone has questions on this please PM me.
Adam