• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How to change my fuel filter?

  • Thread starter Thread starter FrankiE D 9731
  • Start date Start date Apr 18, 2005
F

FrankiE D 9731

New Member
Aug 26, 2004
9
0
0
Netcong NJ
Apr 18, 2005
#1
  • Apr 18, 2005
  • #1
Where is the location of it, and how to change the fuel filter on my 1989 mustang LX 5.0 ?? Thanks for the help Frank
 

bmorrisj

Member
Sep 26, 2003
449
0
17
Buena Park, CA
Apr 18, 2005
#2
  • Apr 18, 2005
  • #2
its right in front of the fuel tank between the tank and the rear end, bell shaped with a hose on both ends....unclip the hoses, take it out, and do the reverse with the new one, mind the fuel flow direction....

wear safety goggles, you will get gas on you....
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Apr 18, 2005
#3
  • Apr 18, 2005
  • #3
Also important to note: the clips will sometimes (most of the time?) break when popping them out. This is ok, so don't worry if it happens. Just be sure the new filter comes with two plastic clips. They are all supposed to.
 
S

Scorcher2005

Member
Apr 17, 2004
883
0
16
South Carolina
Apr 18, 2005
#4
  • Apr 18, 2005
  • #4
you forgot to tell him to undue the hose clamp...(and of coarse tighten it down at the end)
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 18, 2005
#5
  • Apr 18, 2005
  • #5
Scorcher2005 said:
you forgot to tell him to undue the hose clamp...(and of coarse tighten it down at the end)
Click to expand...
it has been awhile since i did one, but i think the clips that Adam is talking about are used in lieu of hose clamps.
 
W

whitenblu89

Member
Jul 25, 2003
70
0
6
westland mi
Apr 18, 2005
#6
  • Apr 18, 2005
  • #6
i think he ment the hose clamp thing that holds the filter in place.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 19, 2005
#7
  • Apr 19, 2005
  • #7
whitenblu89 said:
i think he ment the hose clamp thing that holds the filter in place.
Click to expand...
gotcha. that makes sense.

if someone has to be reminded to do that, i dont think they should do a filter change themself.
 
8

89 Saleen#455

Founding Member
Dec 29, 1999
519
5
39
New England
Apr 19, 2005
#8
  • Apr 19, 2005
  • #8
You should also relieve the fuel pressure at the schrader valve before removing any of the hoses.
 
You must log in or register to reply here.

Similar threads

D
Is this a fuel filter?
  • Dutch74
  • Oct 2, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
7
Views
304
1974 - 1978 Mustang II Talk & Tech Oct 21, 2025
welder4956
C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
113
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
W
Need help! 1989 mustang
  • wickedzach487
  • Mar 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
256
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
AeroCoupe
W
Engine My engine dies after running 10 to 15 minutes under high heat.
  • Wylieone
  • Jun 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
178
Fox 5.0 Mustang Tech Jun 22, 2026
Mustang5L5
J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
254
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?