how to clean a 2v motor ?

fiveoho · Nov 18, 2009

this intimidates me big time. i've cleaned the motor on my 95 before with no bad after effects (bagged the distrib,coil, alternator, maf, egr, fuse box, few other various electronics). one time i used engine brite degreaser. another time i used simple green. sprayed the cleaner on, let it sit for a while, hosed everything off. got a leaf blower and from a good distance away, blew everything off. fired right up. im scared to death to clean the motor in my 00 GT. i have a fear of getting something wet, like the COPs. what do you guys do to clean yours? have you had any issues afterward? i dont want it all greasy, just nice and clean.

thanks in advance

Gearbanger 101 · Nov 18, 2009

Soak it down with degreaser and avoid spraying the COP's and wiring directly and you'll be fine. Warm it up ahead of time and leave it running while you're hosing it off, so whatever water does get into those areas dries quickly and doesn't have the chance to work its way into every nook and cranny of the electrical system.

Don't sweat it.

GettinThere · Nov 19, 2009

^ +1

Also don't use high pressure water.

SteedaGT9150 · Nov 19, 2009

i use simple green, an old cloth, and a hose. works well for me, and damn does a clean engine bay set a car off.

04GTBLKVERT · Nov 19, 2009

Use a degreaser and a pressure washer and you will be fine. If your engine is really bad go to Autozone or somewhere of that sort and get a soft tip brush and agitate the bad spots. Also after you get done washing if you want you can mist it with Armor All and then get a rag and wipe it down.

san~man · Nov 19, 2009

Warm motor, simple green, hose. Done.

fiveoho · Nov 20, 2009

so no worries with the electronics? inevitably, everything under the hood will have water on it....

GettinThere · Nov 20, 2009

04GTBLKVERT said:
Use a ... pressure washer...

I wouldn't. I think the main reason people have drivability issues after washing the engine is because they used high pressure water.

I've washed the engine in my car at least once a year since 2002 (as well as other vehicles) and have never had a problem.

04GTBLKVERT · Nov 20, 2009

fiveoho said:
so no worries with the electronics? inevitably, everything under the hood will have water on it....

You will be fine I do it all the time and my buddy's use to be scared too and then I show them and now they do it too.

slonlow2000 · Nov 21, 2009

So simple green, and just a hose with no nozzle just allowing the water to come through at its own pressure.

But is there anything you guys cover, like the alt. or anything?

Gearbanger 101 · Nov 21, 2009

Hot water works best if you have access to it. Nothing cuts the grease like a good steam clean. Anyone who's tried to wash their dishes in cold water, knows what I'm talking about.

how to clean a 2v motor ?

fiveoho

Gearbanger 101

Straight Outta Locash

GettinThere

Member

SteedaGT9150

Advanced Member

04GTBLKVERT

New Member

san~man

O-G

fiveoho

GettinThere

Member

04GTBLKVERT

New Member

slonlow2000

New Member

Gearbanger 101

Straight Outta Locash

Similar threads

how to clean a 2v motor ?

Straight Outta Locash

Member

Advanced Member

New Member

O-G

Member

New Member

New Member

Straight Outta Locash

Similar threads

Privacy & Transparency

Privacy & Transparency