• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

How to remove rear springs?

  • Thread starter Thread starter shallto
  • Start date Start date Apr 26, 2004
S

shallto

Founding Member
Jun 1, 2001
464
0
16
OBX, NC
Apr 26, 2004
#1
  • Apr 26, 2004
  • #1
I just did the front springs. What a pain. Can someone give me a rundown on rear spring removal. Also, have any of you ever cut a coil off of a rear spring to lower it. I put some drag spings up front , and want to level it out a little.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,249
17,930
224
Massachusetts
Apr 26, 2004
#2
  • Apr 26, 2004
  • #2
For rear springs. Two jacks would help, but 1 will work. Make sure you have some jackstands.

Jack up rear and take off tires. Put jackstands under the axle. Unbolt both shocks and the quad shocks. Put jack under 1 side and lower it down spring should pop out with no tension at all. Replace spring and jack it back up. do same for other side
 

ALMOST STOCK

Founding Member
Sep 23, 2000
1,250
41
88
CA.
Apr 26, 2004
#3
  • Apr 26, 2004
  • #3
COURTESY OF MFE ON CORRAL.

Block the front wheels and raise the rear end. Leave the floorjack under the diff, and place the rear end on jackstands just ahead of where the lower control arms connect.

Remove the rear wheels.

Undo and remove the swaybar (15mm Deep)

Undo the lower shock mount, fasteners vary but it may be a Torx and it may be a 15mm 18mm combo.

Remove the quad shocks.

Lower the jack so the axle drops as far as you can without pulling the rear brake flex line.

Now put a second jack under one end of the axle and raise that end as high as you can.

You can now probably just pluck the low-side's spring out. If not, have a helper stand on the low end of the axle to help it the last little bit and pull the spring out, it’s not under any compression at this point.

Swap isolators to the new spring, orient it so the flat side is up and the bottom pigtail points to the drivers side (for BOTH springs).

Lower the high-side jack, make sure the new spring is seated properly, and repeat the process for the other side.

When you’re done, raise the diff back up, reconnect the quad shocks and shocks. Re-attach the swaybar, reinstall the wheels, lower the car and you're done in way under an hour.
 
J

jerry beach

Founding Member
May 20, 2002
2,671
0
46
Ocala,FL
Apr 26, 2004
#4
  • Apr 26, 2004
  • #4
Wow, its that easy! I removed my lower control arm bolts from the axle housing and lowered them down with another jack. I used the second jack on the dogbone to twist the rear end. I am glad I replaced those bolts though, they were about to rust in two. I took my shocks loose, but left the quads connected.
 

ALMOST STOCK

Founding Member
Sep 23, 2000
1,250
41
88
CA.
Apr 26, 2004
#5
  • Apr 26, 2004
  • #5
It's just that easy.
 
You must log in or register to reply here.

Similar threads

Suspension Is somethig Wrong Here?
  • Icemanxxxv
  • Saturday at 12:57 PM
  • Fox 5.0 Mustang Tech
Replies
5
Views
85
Fox 5.0 Mustang Tech Saturday at 6:08 PM
AeroCoupe
S
Suspension Spring I.D. help?
  • Scott_S
  • Aug 21, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
181
Fox 5.0 Mustang Tech Aug 21, 2025
Scott_S
S
R
Interior and Upholstery Interior roof adhesive removal HELP
  • Riley Barth
  • Jun 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
93
Fox 5.0 Mustang Tech Jun 23, 2026
Riley Barth
R
Suspension End link replacement size
  • Teen'93stang5.0
  • May 12, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
136
Fox 5.0 Mustang Tech May 20, 2026
Teen'93stang5.0
Paint and Body Frame rail dimensions
  • keel
  • Jan 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 13, 2026
keel
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?