how to turn my 01 cobra into an 03 cobra.......

ok guys, i was thinking about supercharging my car. i really want the set up that the 03/04 cobra has. i know nothing of this operation. first off, is this even possible?? has anybody done this??? how hard is it gonna be?? what are all the parts i will need?? do they make a kit for this?? thanks guys!! :nice:
 
four.six said:
dont i have the same 4.6L DOHC motor as the 03/04 cobra?? im just missing the supercharger/parts?? right?

Hmmm, no

99-01 Cobra use an aluminium block, 03+ use iron. 99-01 have cast internals, 03+ have forged internals. The heads are differents, the cams are different, not the same engine AT ALL.
 
Avenger said:
Hmmm, no

99-01 Cobra use an aluminium block, 03+ use iron. 99-01 have cast internals, 03+ have forged internals. The heads are differents, the cams are different, not the same engine AT ALL.

OIC..... i did not know that. i feel like an idiot. well, maybe i should just invest in a vortech..... thanks anyways guys.
 
Yeah, you're better off adding a Vortech to your '01 instead of piecing together an 03/04 supercharger setup (for cost reasons).

Be careful with the boost, if you get too greedy the engine will let go - as a handful of other 96-98 & 99/01 owners have found out.
 
I would advise spending some money on forged internals if you want to make serious power. My friend is running an S-trim @ 8psi making 430 rwhp. I think it's a conservative setup and will last a long time but I wouldn't recommend more than 10 psi on the stock longblock.
 
COBRA90GT said:
Yeah, you're better off adding a Vortech to your '01 instead of piecing together an 03/04 supercharger setup (for cost reasons).

Be careful with the boost, if you get too greedy the engine will let go - as a handful of other 96-98 & 99/01 owners have found out.

276.5 before exhaust and 312.6 after exhaust??.... DAMN :nice: maybe i should just get the same exhaust u got...

edited: damn, that catted x from magnaflow is $1384.07...... HOLY CRAP!!!
 
Avenger said:
99-01 have cast internals, 03+ have forged internals.
Actually, the cranks are forged in all 4.6L Cobra's....all that would really need to be added are a good set of Rods and Pistons. Which can actually be had fairly cheaply now. Add a Vortech, ATI, or a Paxton along with the new internals and make '03-'04 Cobra sing for their supper.
stangman said:
:rolleyes: For once, could we please leave the retarded KB comments at the door. :nono:
 
Gearbanger 101 said:
Actually, the cranks are forged in all 4.6L Cobra's....all that would really need to be added are a good set of Rods and Pistons. Which can actually be had fairly cheaply now. Add a Vortech, ATI, or a Paxton along with the new internals and make '03-'04 Cobra sing for their supper.

:rolleyes: For once, could we please leave the retarded KB comments at the door. :nono:



KB, KB, KB :rolleyes:


it's what i'd get, so i'm recommend it :rolleyes: it's a good street blower, period