HPM Mega Byte Jr. Questions

98midnight · Jul 1, 2011

I'm wondering what the hole on the top of the brackets on the mega byte jr's is used for. it looks like a bolt is supposed to go through there but not sure. Also, is the straight side of the bracket suppose to be facing to the outside of the car or to the inside? Any help would be greatly appreciated.
Thanks

Chythar · Jul 2, 2011

I have the Mega-Byte jr's on my Cobra clone. Got no idea for why there's a hole there; my random and unscientific guess is it's for moisture evaporation. Maybe when assembling the Jr's HPM needed an out-gassing hole for the welding. As for which side of the bracket faces which way, here's a photo of mine installed:

Hint: the straight part is on the outside.

98midnight · Jul 2, 2011

Awesome. Thanks a lot for the info and the picture; just wanted to make sure that hole wasn't there for a reason

98midnight · Jul 2, 2011

btw...clean setup man, looks good.

bayellowstang · Jul 2, 2011

The hole is there to change the pinion angle which can change traction levels, I think. I just looked at mine and the top holes are open on mine. They were on the car when I got it and have never messed with them to know a difference. Maybe I will try changing them and see if it hooks better.

Last5.0 · Jul 2, 2011

He's not talking about the mounting holes on the sides, but on the top of the arm near where the square tubing is welded to the round tubing for the bushing.

You can see them in this pic...

98midnight · Jul 3, 2011

i'm talking about the top hole on the brackets that are seperate from the arm. theres a top and bottom holes for the "amount of traction" then the hole to mount to the rear end, then theres a top hole on the bracket that i'm just not sure about. Bayyellow, if you get a chance would you mind lookin on yours and see if theres something in the top that i'm trying to describe.
Thanks a lot

Chythar · Jul 3, 2011

Oh! The hole that's on the back of the bracket, kinda pointing out the back of the bracket? In the photo that Last5.0 put up, the hole is on the "left" of the brackets in that photo? That's for extra support. You need to remove the nut and bolt that hold the shock mount in place, then put a new, longer bolt through the shock mount and through the hole in the Mega-Byte Jr's bracket.

98midnight · Jul 3, 2011

alright, now it's making sense. Thanks a lot for the help everyone. just couldn't figure out what the hell that was for haha. thank you though

HPM Mega Byte Jr. Questions

98midnight

New Member

Chythar

Recently finished repairing my rear

98midnight

New Member

98midnight

New Member

bayellowstang

Member

Last5.0

Active Member

98midnight

New Member

Chythar

Recently finished repairing my rear

98midnight

New Member

Similar threads

HPM Mega Byte Jr. Questions

New Member

Recently finished repairing my rear

New Member

New Member

Member

Active Member

New Member

Recently finished repairing my rear

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency