• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Hydrocarbon trap removal, dyno results.

  • Thread starter Thread starter M1Rifle
  • Start date Start date Dec 6, 2004

M1Rifle

New Member
May 23, 2004
137
0
0
Dec 6, 2004
#1
  • Dec 6, 2004
  • #1
No need to post the detail twice, see the original post here: http://forums.bradbarnett.net/index.php?showtopic=10795

Additional info:

I dropped the car off with a Flowmaster axle-back system (not a kit they are selling, but off the shelf parts), and the HC trap removed. The dyno shop did lots of testing, but didn't put it all back to stock prior to doing the first run.

There were discrepancies in the spreadsheet I got from the dyno shop. So I am only posting the HC trap runs, as they were clean. I'll update with full dyno run info from all the runs after I get that detail.

HC trap deltas were taken with stock exhaust, but with an SCT 91 octane flash tune. Also, I only had spreadsheet data to 6000 rpm. The HP increases past 6000 rpm on this dyno run.

Once I get all the dirty details (I've asked the shop for the raw data from the dyno runs), I'll tabulate them and we'll repost. Then we'll also be able to show factory mufflers vs. this particular Super40, and factory tune vs. SCT tune. Until I clear up the discrepancy in the other spreadsheet data, it doesn't make sense to publish it.
 
D

Darkhorse845

Banned
Nov 17, 2004
101
0
0
Las Vegas,Nevada
Dec 7, 2004
#2
  • Dec 7, 2004
  • #2
Not bad!
 

zenboy99

Founding Member
May 12, 2002
2,212
0
47
Madison, WI
Dec 10, 2004
#3
  • Dec 10, 2004
  • #3
Thats a really nice torque curve! From reading the 5.0 Mustang article it seemed like these cars were a dog down low.
 

KenB

Founding Member
Feb 26, 2002
1,416
0
36
West Palm Beach
Dec 18, 2004
#4
  • Dec 18, 2004
  • #4
We did some similar testing today.

Here's what we did, this is on a 5 speed:

Completely stock
Completely stock with SCT Xcalibrator
HC trap removed with SCT Xcalibrator
HC trap removed with MMR intake with SCT Xcalibrator
Same as above with Magnaflow catback.

I'm working on the article right now with pics and dyno graphs. I'll be putting it up on our homepage Monday morning or before.

Ken
 
G

gilmoujr

New Member
Sep 24, 2004
126
0
0
Dec 19, 2004
#5
  • Dec 19, 2004
  • #5
KenB tuned my (wife's) car and it was some pretty decent testing. Ken put in several hours doing this and the data gained from the testing is enormous in my opinion. Lost of things different that are worthy to note.
 
You must log in or register to reply here.

Similar threads

Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
240
SVT Tech Forum Feb 20, 2026
squeak93
Digital Tuning BAMA SCT ETC.
  • MarineDeuce
  • Jul 12, 2019
  • 2010 - 2014 Specific Tech
Replies
0
Views
1K
2010 - 2014 Specific Tech Jul 12, 2019
MarineDeuce
N
New guy here, had some question I need help with
  • Nem0
  • Sep 3, 2018
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2018
Nem0
N
8
Shocked by Dyno Results - 1990 Mark VII with 5.0 HO
  • 88Mark7
  • Mar 12, 2018
  • Other Auto Tech
Replies
6
Views
7K
Other Auto Tech Oct 6, 2018
I Bleed Ford Blue
S
For Sale 2003 Cobra Redfire Convertible
  • SpectorV
  • Feb 20, 2019
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
5K
SN95 Mustangs For Sale (1994-04) Feb 20, 2019
SpectorV
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?