Hypertech I didn't know about. What do I do?

tording

Founding Member
Nov 11, 2000
164
0
0
Hampton, VA
Ok. So I had a code 15 being thrown which is the KAM code for the computer saying the KAM is not working. This is either from not getting 12V or from a chip. I tore out the computer finally and guess what. I do have a hypertech chip. Its the standard Street runner chip Part #689021. It says its for a 5 speed which my car is but the sticker on the chip says its for an 89. My car is a 92. Is this a problem? I don't think so because they should be the same but I want to see what you all think. So now what do I do? Do I leave this chip in or should I take it out? I guess this answers the question as to why my car detonates if I dont put 93 ocatane gas in it. I don't know if I should leave it or not. The car is pretty stock as you can see in my sig and I don't really see where a chip is helping a stock car all that much if any. What do you all think?

IMG_1380.jpg
 
i'd pull the chip out.. basically pointless when you can just bump timing by the distributor.. it should be able to work with 89-93 cars.. shouldnt be much difference
 
I'll have to agree with tossing the chip out too.


I would like to hear if the code 15 comes back with the chip pulled though.

Let us know how it runs too....



Good Luck,


:Word:
 
I took the chip out and I can't seem to notice a difference. It almost seems to have better throttle response now with the chip out. I just pulled codes tonight before I came to work with the chip out and no code 15. YAY. I think I am gonna leave it out for a few days and see what I think. Hopefully I can put 87 fuel in it now. I always hated having to put 93 octane fuel in a stock 220 hp mustang. I will keep ya posted.