I Broke The Bolt That The Front Swaybar Goes To The Frame

Yellow302 · Oct 25, 2012

The title says it all.

It is a small clip with a stud coming out of it. There are two on each side of the frame that the swaybar mounts to. What is the name of this part?

This have been discontinued. I would appreciate any suggestions on how to get a replacement.

I took a pic as well.

Noobz347 · Oct 25, 2012

Not sure what the specific name for that part is however... I THINK that the Steeda kit comes with all necessary hardware. You can upgrade your OEM sway bar for relatively cheap at the same time.

SteedaBrandon should be able to shed a little more light on it and also know if there are any additional mods necessary when changing the rear sway bar.

VibrantRedGT · Oct 25, 2012

Noobz is correct. When I bought the Steeda front swaybar, rear swaybar and additional adjustable rear swaybar back in the day it came with all the hardware needed.

Looks like lots of salt corrosion, man that hardware is shot.

Yellow302 · Oct 26, 2012

VibrantRedGT said:
Noobz is correct. When I bought the Steeda front swaybar, rear swaybar and additional adjustable rear swaybar back in the day it came with all the hardware needed.

Looks like lots of salt corrosion, man that hardware is shot.

Yeah car sat in the garage with the dryer machine pumping humid air in for 900+ days. If you didn't open the garage it looked like a cloud in there. Mold growing on the seats, the damness deteriorated the carpet too.

The underbody surface rust on the car is terrible, already started wire wheeling it all off and using underbody rust sealer and barrier stuff, actully coming out nice. That is on hold untill I get get it up on a lift, its just too much to do on my back.

Yellow302 · Oct 26, 2012

Noobz347 said:
Not sure what the specific name for that part is however... I THINK that the Steeda kit comes with all necessary hardware. You can upgrade your OEM sway bar for relatively cheap at the same time.

SteedaBrandon should be able to shed a little more light on it and also know if there are any additional mods necessary when changing the rear sway bar.

I already have new bushings, mount plates and link ends for the stock swaybar. Not looking to spend money where it is not really needed for me.

It is some sort of J-Clip or C-Clip. I dont see that hardware anywhere on steeda's website. I might have to call them.

Yellow302 · Oct 26, 2012

More info, Found the correct part NAME but no part number yet...

1994 mustang front sway bar bracket nut

Noobz347 · Oct 26, 2012

I'll ping SteedaBrandon once again. He might be able to help you with the smaller pieces and parts. Not sure.

Yellow302 · Oct 26, 2012

Found it!

Fordparts.com

4PK
N806729-S150

View attachment 142022

STUD&RETAIN-M10X1.5X39WAFER SQ

This is the nut for the bottom... its showing 1x

N805474-S60

View attachment 142023
NUT-M10X1.5 HEX LOCKP/T NYLON

Yellow302 · Oct 26, 2012

Yellow302 said:
Found it!

Fordparts.com

4PK
N806729-S150

View attachment 142020

STUD&RETAIN-M10X1.5X39WAFER SQ

This is the nut for the bottom... its showing 1x

N805474-S60

View attachment 142021
NUT-M10X1.5 HEX LOCKP/T NYLON

Found better pricing.

FORDPARTSGIANT.COM

Shopping Cart
Part No.DescriptionQty.Unit
PriceExt.
Price
**806729-S150 STUD
Replaced by: **806729-S436 4
Update
Remove $2.68 $10.72
**805474-S60 NUT-M10X1.5 HEX LOCK
Replaced by: **805474-S436 4
Update
Remove $1.89 $7.56
Calculate Shipping
UPS Ground $12.11

Subtotal: $18.28
Shipping: $12.11
Tax: $0.00

Total:
$30.39

Noobz347 · Oct 26, 2012

You going to replace the other rusty (but not yet broke) hardware on the other side too?

Yellow302 · Oct 26, 2012

Noobz347 said:
You going to replace the other rusty (but not yet broke) hardware on the other side too?

You bet your a$$ I will lol 4x all new hardware.

I'll cover the parts with grease to prevent rust and corrosion as well.

Noobz347 · Oct 26, 2012

Get yourself a spray can of undercoat.

I Broke The Bolt That The Front Swaybar Goes To The Frame

Yellow302

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

Yellow302

Member

Yellow302

Member

Yellow302

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Yellow302

Member

Yellow302

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Yellow302

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

I Broke The Bolt That The Front Swaybar Goes To The Frame

Member

Stangnet Facilities Maint Tech... Er... Janitor

"STANGNET'S PENGUIN SMACKER"

Member

Member

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency