I changed drive belt, and then...

mity2 · May 21, 2005

notice that one of my idler pully is noisy as @uck. and it wabbles. it shouldn't do that right? all other idler pully(or any other pully for that matter) does not make any noise when I spin them with my hand, or wabble while belt is off...
see pic below

View attachment 514157

COramprat · May 21, 2005

Nope...not supposed to wobble. Bearings probably went bad. A new one isn't too uch...like 15 bucks at Autozone.

mity2 · May 21, 2005

thats what i figured. i'll get one tomorrow

Mike97gt · May 21, 2005

thats a idler pulley. good thing you caught it before it seized and left you stranded.

Kilgore Trout · May 21, 2005

Should have gotten a Gator belt. They are much less likely to squeal when getting on it. I hate the f'n belt squeal...

chimchim · May 21, 2005

I think mine is ready too. How many miles on your car Mity? I wonder if we can get one made of aluminum with HD bearings somewheres?

highvolts · May 21, 2005

Kilgore Trout said:
Should have gotten a Gator belt. They are much less likely to squeal when getting on it. I hate the f'n belt squeal...

Gatorback is the best.. I had some problems when downshifting the stocker would squeel. Gatorback fixed that

rjstaaf · May 21, 2005

Couldn't sleep last night and I had the parts (Motorcraft) so I swapped out both idler pulleys, the belt tensioner and put on a fresh Goodyear Gatorback belt. My GT just past 57K miles and the pulleys were starting to make noise.

Old Parts

New Parts Installed

mity2 · May 21, 2005

chimchim said:
I think mine is ready too. How many miles on your car Mity? I wonder if we can get one made of aluminum with HD bearings somewheres?

@#%$ing 38000 miles. i've been wondering why my car suddenly got really noisy when i start her up. funnything is that it sounded just like way my cougar sounded when i floored with CAI.

but like Mike said, its good thing I cought it now. Not somewhere in side of road in Amish county(there are many around here)

chimchim · May 21, 2005

Coramprat was right. I just went to Advance Auto and got one for $14.94. When I shake the old one, you can hear it rattle inside. The new one is tight as a nun and it doesn't move at all when bolted into place. I could move the old one back and forth when it was bolted on. I feel much more reliable now.

EDIT: I got 58,000 miles. The guys that did my headswap at 56,000 told me I would need a new one soon. I guess they were right. hahaha

Barrier · May 21, 2005

chimchim said:
Coramprat was right. I just went to Advance Auto and got one for $14.94. When I shake the old one, you can hear it rattle inside. The new one is tight as a nun and it doesn't move at all when bolted into place. I could move the old one back and forth when it was bolted on. I feel much more reliable now.

EDIT: I got 58,000 miles. The guys that did my headswap at 56,000 told me I would need a new one soon. I guess they were right. hahaha

xD tight as a nun... I love it

todd4566 · May 21, 2005

rjstaaf said:
Couldn't sleep last night and I had the parts (Motorcraft) so I swapped out both idler pulleys, the belt tensioner and put on a fresh Goodyear Gatorback belt. My GT just past 57K miles and the pulleys were starting to make noise.

Old Parts

New Parts Installed

Sorry to be off topic, but d@mn that engine is clean for 57k!

mity2 · May 21, 2005

i got one at Ford for $13.99. Mine was just like chimchim said about his. when belt is off, i can spin it, and it makes cranking sound, and I can wabble the darn thing with Belt on or off.

Now its all good again! super easy to reprace too. But anyone know what torque i should tighten the bolts to?

rjstaaf · May 21, 2005

mity2 said:
Now its all good again! super easy to reprace too. But anyone know what torque i should tighten the bolts to?

Haynes manual says 15-22 ft-lbs.

chimchim · May 21, 2005

I cranked mine till it stripped then I backed it off a 1/4 turn.

Just kidding. Sometimes, when I take bolts off I put the torque wrench on and try to watch and see what torque it breaks loose at. I know this is not accurate, but it'll get you in the ballpark. The bolt on mine broke loose at 30 ft-lbs, so that's where it is now.

COramprat · May 21, 2005

MikeZ28 said:
thats a idler pulley. good thing you caught it before it seized and left you stranded.

Werd...they usually start sceaming at you before they go out so at least you have some warning. If you ignore it then you may need a horse and buggy ride back to town with mity2.

mity2 · May 21, 2005

coramprat said:
you may need a horse and buggy ride back to town with mity2.

Mike97gt · May 22, 2005

coramprat said:
Werd...they usually start sceaming at you before they go out so at least you have some warning. If you ignore it then you may need a horse and buggy ride back to town with mity2.

yeah my girlfriends car started getting a chip noise back a few months ago. ( little POS sunfire) i figured i will fix it on monday so i can get my parts discount ( we are a ford/chevy dealer) well that saturday it seized on me and i had too have it towed in too work i should have just bought the damm thing when i first heard it instead of tring too be cheap.

mity2 · May 26, 2005

rjstaaf said:
Haynes manual says 15-22 ft-lbs.

thats same as 180In-lbs~264in-lbs right?
i have to use my smaller scale toque wrench...

35thstang99 · May 26, 2005

hey ...do u still want to do this with the catback

I changed drive belt, and then...

mity2

I like Pro3 and all I got was this crappy CT.

COramprat

...I can take it. I think.

mity2

I like Pro3 and all I got was this crappy CT.

Mike97gt

it doe snot

Kilgore Trout

Fried or Broiled ?

chimchim

New Member

highvolts

rjstaaf

mity2

I like Pro3 and all I got was this crappy CT.

chimchim

New Member

Barrier

New Member

todd4566

mity2

I like Pro3 and all I got was this crappy CT.

rjstaaf

chimchim

New Member

COramprat

...I can take it. I think.

mity2

I like Pro3 and all I got was this crappy CT.

Mike97gt

it doe snot

mity2

I like Pro3 and all I got was this crappy CT.

35thstang99

Member

Similar threads

I changed drive belt, and then...

I like Pro3 and all I got was this crappy CT.

...I can take it. I think.

I like Pro3 and all I got was this crappy CT.

it doe snot

Fried or Broiled ?

New Member

I like Pro3 and all I got was this crappy CT.

New Member

New Member

I like Pro3 and all I got was this crappy CT.

New Member

...I can take it. I think.

I like Pro3 and all I got was this crappy CT.

it doe snot

I like Pro3 and all I got was this crappy CT.

Member

Similar threads

Privacy & Transparency

Privacy & Transparency