• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I dont get it

  • Thread starter Thread starter rockyracoon
  • Start date Start date Apr 28, 2006
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
Apr 28, 2006
#1
  • Apr 28, 2006
  • #1
I replaced the rotors and pads and im getting pulsing in the pedal and shimmy especially when coming to a stop.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Apr 28, 2006
#2
  • Apr 28, 2006
  • #2
Did you replace the slide pins or at least grease them up?
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Apr 28, 2006
#3
  • Apr 28, 2006
  • #3
I've seen some crappy "made in china" rotors come out of the box warped. How do feel the rotors you bought rate on the quality scale?
 
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
Apr 28, 2006
#4
  • Apr 28, 2006
  • #4
they seemed good quality,I think they were bendix.I did grease the pins and even if I didnt wouldnt that cause the car to pull as opposed to the brake pedal pulsing.Im gonna see if there is any runout with my dial indicator.I just cant believe that the rotors could be warped from the factory.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Apr 28, 2006
#5
  • Apr 28, 2006
  • #5
you may have some front end issues check the tie rods and ball joints for play and adjust rear brakes to ensure the front is not doing all of the stopping where did you buy the rotors i have had this problem in the past buying the cheap rotors from autozone and oriellys and advance autoparts in the past...and did you break in pads properly?
 

Fett

New Member
Nov 2, 2004
766
6
0
Apr 28, 2006
#6
  • Apr 28, 2006
  • #6
Sounds like ball joints, bad ones can cause the same vibrations during braking that warped rotors do.
 
You must log in or register to reply here.

Similar threads

Brake pad and rotor upgrade
  • Sparky714
  • Aug 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
634
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Sparky714
M
Misfire
  • Mike3
  • May 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
156
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 30, 2026
Mike3
M
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
189
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
529
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Engine Vacc leak detector
  • Creomod
  • Jul 19, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
227
Fox 5.0 Mustang Tech Jul 25, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?