G godsmak53190 New Member Apr 1, 2003 63 0 0 Arlington Heights, IL May 3, 2004 #1 May 3, 2004 #1 do you think an 00 auto gt could hit consistant high 12s with 3400-3600 stall 4.30 gears+chip+higher/firmer shifts *bumped timing*? underdrive pullys full exhuast
do you think an 00 auto gt could hit consistant high 12s with 3400-3600 stall 4.30 gears+chip+higher/firmer shifts *bumped timing*? underdrive pullys full exhuast
streetstang03 unModerator Dec 27, 2003 0 1 0 the dark side of the moon/home of the 1999, 2003, May 3, 2004 #2 May 3, 2004 #2 Im pretty sure you would need some DR's and some suspenion mods. Some lower control arms/upper control arms, springs etc..... Cams too http://forums.modulardepot.com/showthread.php?s=&threadid=1877
Im pretty sure you would need some DR's and some suspenion mods. Some lower control arms/upper control arms, springs etc..... Cams too http://forums.modulardepot.com/showthread.php?s=&threadid=1877
Modular2v Founding Member Jun 30, 2002 3,222 23 99 oklahoma May 3, 2004 #3 May 3, 2004 #3 nope not without stickies
G godsmak53190 New Member Apr 1, 2003 63 0 0 Arlington Heights, IL May 3, 2004 #4 May 3, 2004 #4 i forgot to add that it ran 14.40s w/sh1tty 60 ft times, sumthin like 2.xx at a wisconsin track w/crappy prep
i forgot to add that it ran 14.40s w/sh1tty 60 ft times, sumthin like 2.xx at a wisconsin track w/crappy prep
G godsmak53190 New Member Apr 1, 2003 63 0 0 Arlington Heights, IL May 3, 2004 #5 May 3, 2004 #5 RED98Z28 said: nope not without stickies Click to expand... why exactly did you go from the almighty ls1 to a 2 valve gt jw???? how do you like em in comparison
RED98Z28 said: nope not without stickies Click to expand... why exactly did you go from the almighty ls1 to a 2 valve gt jw???? how do you like em in comparison
J jas142 Founding Member Feb 11, 2002 1,358 0 0 May 3, 2004 #6 May 3, 2004 #6 You'd NEED slicks and then it'd still be a little bit of a stretch. On another note, do you think with slicks, 3600 stall, and 4.30 gears you'd lift the front off the ground when launching?
You'd NEED slicks and then it'd still be a little bit of a stretch. On another note, do you think with slicks, 3600 stall, and 4.30 gears you'd lift the front off the ground when launching?
JonJon Founding Member Aug 16, 2002 4,801 1 68 back in Marylands May 3, 2004 #7 May 3, 2004 #7 You probably could if you had the right suspension and weight reduction.
dkshadow Banned May 12, 2003 952 0 0 TEXAS May 3, 2004 #8 May 3, 2004 #8 i can see a low to mid 13 sec pass on street tires.