I have tranny question VERY IMPORTANT

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jul 17, 2005

#1

• Jul 17, 2005

• #1

I have a 1990 Ford Mustang GT 5.0. It had an AOD in it and I went through those things like water. Everyone told me to put a C4in there so I did. Now I have another problem. For the past couple weeks I would try to drive my car as soon as i crank it and it would slip realllly bad. As soon as I let it warm up driving it. I would be driving in 1st gear turning 5000 rpms and then at once it would grab instanly and run great. But now it will not pull itself at all. Can anyone tell me what it is. I just put this thing in there a month ago. It has plenty of fluid, new filter Got any ideas?

 

90mustangGT

I felt sorry for girls because

Founding Member

Jan 15, 2002

2,773

17

89

Dallas, GA

Jul 17, 2005

#2

• Jul 17, 2005

• #2

That is hard to say, take it to a good tranny tech which will have the right tools and experience to figure out exactly what the problem is.

I guess the first thing to find out would be weather it gets line pressure or not.

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jul 17, 2005

#3

• Jul 17, 2005

• #3

What do you mean line pressure.

 

12sec67

Active Member

Oct 6, 2003

1,301

1

36

San Diego, Ca

Jul 17, 2005

#4

• Jul 17, 2005

• #4

the valve body might also be sticking..

 

S

Scorcher2005

Member

Apr 17, 2004

883

0

16

South Carolina

Jul 17, 2005

#5

• Jul 17, 2005

• #5

is the tranny new or used?

 

mustangfan1990

New Member

Jul 17, 2005

505

1

0

Lenoir, North Carolina

Jul 17, 2005

#6

• Jul 17, 2005

• #6

Scorcher2005 said:

is the tranny new or used?

Click to expand...

Its used. I just tried adjusting the intermediate and low and reverse bands and it seemed like it was working then quit?

 

The Shape

Founding Member

Jan 11, 2002

2,224

8

49

East ARKANSAS Delta

Jul 17, 2005

#7

• Jul 17, 2005

• #7

Are you having these installed at a shop? You say you have been through a bunch of AOD's and now a C4. If these are being installed by a shop you might try another shop.