I need a door panel picture if someone can help.

Wayne Waldrep · Jan 11, 2019

Got the left side door panel off. Let's see if I can do this on my phone with no picture for reference. There are two main bolts that hold the armrest on. There is also one trim screw in the back of the armrest and one trim screw in the front. The Phillips head trim screw in the front is what I'm asking about. Behind that screw is a hole that's about 1/2" or so in diameter. The screw goes straight into the middle of this hole so apparently I have a clip or speed nut missing. I have an assortment of clips and speed nuts but zero of them fit or even act like it's the correct item for that spot. Can anyone take me a picture of this? I'd like to see what the part looks like so I can get one. I'd also like to see it installed in the door.
Not asking much, huh.....lol. Not asking anyone to pull a door panel but surely someone has one currently off OR maybe an old picture of your door we could look at.
Thanks for your help.

Mustang5L5 · Jan 11, 2019

I might have some pics. Let me search

Mustang5L5 · Jan 11, 2019

Best I have

I actually do need to pull my pass door panel off to replace the speaker. If I get to it this weekend I'll take some pics.

But it would appear I have nothing for that too screw as well.

Mustang5L5 · Jan 11, 2019

This video might show what you need.

View: https://youtu.be/KxEXtd4vG_A

Wayne Waldrep · Jan 11, 2019

Mustang5L5 said:
This video might show what you need.

View: https://youtu.be/KxEXtd4vG_A

Thank you for the help. I'll take a look at those.

Wayne Waldrep · Jan 12, 2019

I think I've figured it out but still would like a pic or two. I looked at LMR's hardware kit and it comes with 2 big and 2 small screws and 4 clips. That front screw that I asked about doesn't need to come out to remove the door panel. The clip must just go behind the door panel and sandwich the top of the armrest with the short screw. I remember back now that I never took that upper screw out. So....when it stops raining , I'll look at my panel and see if that is possible. That's what I'm thinking anyway. Looking at the LMR video it doesn't appear there is anything in that hole. Same for the pic but it's a black door so it's hard for me to see, especially on my phone.

Mustang5L5 · Jan 19, 2019

Wayne Waldrep said:
I think I've figured it out but still would like a pic or two. I looked at LMR's hardware kit and it comes with 2 big and 2 small screws and 4 clips. That front screw that I asked about doesn't need to come out to remove the door panel. The clip must just go behind the door panel and sandwich the top of the armrest with the short screw. I remember back now that I never took that upper screw out. .

You are right. Top screw goes into a clip on the door card itself

Wayne Waldrep · Jan 19, 2019

Mustang5L5 said:
You are right. Top screw goes into a clip on the door card itself

Thanks Mike. I had to put a large washer then a speed nut on mine. The panel was broken out in that spot.

JKWilson61 · Jan 19, 2019

Well drat. My poor timing! Wayne I got pics you had asked for when I finally got a chance to work on mine today. I'll still post them below just in case...

Wayne Waldrep · Jan 19, 2019

JKWilson61 said:
Well drat. My poor timing! Wayne I got pics you had asked for when I finally got a chance to work on mine today. I'll still post them below just in case...

Hey thanks. I appreciate it. I'll save them to my archive...lol. Never know what I may need to see next.

I need a door panel picture if someone can help.

Wayne Waldrep

Before I post a pic, do you have one of yours?

Mustang5L5

That is…until I whipped out my Bissell

Mustang5L5

That is…until I whipped out my Bissell

Mustang5L5

That is…until I whipped out my Bissell

Wayne Waldrep

Before I post a pic, do you have one of yours?

Wayne Waldrep

Before I post a pic, do you have one of yours?

Mustang5L5

That is…until I whipped out my Bissell

Wayne Waldrep

Before I post a pic, do you have one of yours?

JKWilson61

Active Member

Wayne Waldrep

Before I post a pic, do you have one of yours?

Similar threads

I need a door panel picture if someone can help.

Before I post a pic, do you have one of yours?

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Before I post a pic, do you have one of yours?

Before I post a pic, do you have one of yours?

That is…until I whipped out my Bissell

Before I post a pic, do you have one of yours?

Active Member

Before I post a pic, do you have one of yours?

Similar threads

Privacy & Transparency

Privacy & Transparency