I have an 04 cobra with ford racings aluminator in it that we just had rebuilt and dropped in the car this past weekend. We just tried to turn the motor over an hour ago and I am not getting any spark. However the first thing we did is make sure that the machine shop put the striker in. The striker is there and the teeth are facing toward the front. I tried to reload my tune to see if maybe that would work and it did not. I have a bunch of mustang buddies down here that are trying to figure this out with me and one read that the 02 sensors on a modded cobra or mustang in general, if hooked up backwards or wrong could cause there to be no spark. Everything on the wiring harness is plugged in tho. Just need some advice on where to go from here. Thanks