• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

I WANT THE LOUDEST EXHAUST.

  • Thread starter Thread starter Kurtis
  • Start date Start date Jul 15, 2007
  • 1
  • 2
Next
1 of 2 Next Last

Kurtis

New Member
Jul 4, 2003
79
0
0
Jul 15, 2007
#1
  • Jul 15, 2007
  • #1
I'm thinkin SLP Loudmouth for the catback.

For the midpipe, I know h-pipes are louder than x-pipes, but not sure which brand is the loudest. Any advice?

Thanks.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jul 15, 2007
#2
  • Jul 15, 2007
  • #2
and no mufflers would make it loud lol
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Jul 16, 2007
#3
  • Jul 16, 2007
  • #3
From what i've been reading lately.... Lt's with x pipe and 10 series or 40 series flowmasters.
 

Mustank

Founding Member
Sep 11, 2001
166
1
18
Germany
Jul 16, 2007
#4
  • Jul 16, 2007
  • #4
Open headers straight up out of the hood. That's about the loudest you can get.

Or you could go ask on a Honda forum. Those guys are pros at obnoxiously loud exhaust. If they can make 4 cylinders sound that loud, imagine what they could do to a V8.

Also, make sure you remove one spark plug wire to give it a lopey idle.
 

bretamo

Member
May 13, 2005
122
1
16
Jul 16, 2007
#5
  • Jul 16, 2007
  • #5
The results in HP order:
Dyno Max Super Turbo
1.Flowtech Warlock (open) 374.2 hp/ 333.1 tq
2.Bassani Real Street 373.7 hp/ 333.8 tq
3.Hooker Maxflow 373.5 hp/ 333 tq
4.Borla XS 373.3 hp/ 332.6 tq
5.Magnaflow 372.8 / 332.5 tq
6.MAC 372.3 hp / 331.5 tq
7.Flowtech Afterburner 372.3 hp/ 330.1 tq
8.Hooker Aerochamber 372.1 hp/ 330.4 tq
9.Bassani 372 hp/ 333.5 tq
10.Spintech 371.6 hp/ 332.2 tq
11.Edelbrock Performer RPM 370.9 hp / 331.3 tq
12.Borla XR1 370 hp/ 334 tq
13.Flowtech Terminator 369.5 hp / 331.3 tq
14.Dynomax Ultra Flo 369.4 / 333.2 tq
15.Flowmaster 369.4 hp / 331.8 tq
16.Flowtech Warlock 366.3 hp / 325.3 tq
17.No muffs 365.2 hp / 330.1 tq

Sound Off in Quietest to Loudest (Decibels):

1.Borla XS, 80db at idle, 90db at 2,000 rpm, 110db at WOT.
2.Hooker Maxflow, 80db at idle, 90db at 2,000 rpm, 120db at WOT.
3.Magnaflow, 82db at idle, 91 at 2,000 rpm, 114db at WOT.
4.Flowmaster, 82db at idle, 93 at 2,000 rpm, 115db at WOT.
5.Flowtech Warlock, 83db at idle, 92 at 2,000 rpm, 112db at WOT.
6.Dynomax UltraFlo, 83db at idle, 94 at 2,000 rpm, 113db at WOT.
7.Borla XR1, 83db at idle, 96db at 2,000 rpm, 118db at WOT.
8.Bassani Street, 83db at idle, 96db at 2,000 rpm, 120db at WOT.
9.Edelbrock RPM, 84db at idle, 93db at 2,000 rpm, 118db at WOT.
10.Bassani Real Street, 84db at idle, 96db at 2,000 rpm, MAX. (120+db).
11.Flowtech Afterburner, 86db at idle, 94db at 2,000 rpm, 115db at WOT.
12.Flowtech Terminator, 86db at idle, 94db at 2,000 rpm, 119db at WOT.
13.Hooker Aerochamber, 87db at idle, 94db at 2,000 rpm, 114db at WOT.
14.SpinTech, 87db at idle, 97db at 2,000 rpm, 116db at WOT.
15.MAC, 87db at idle, 98db at 2,000 rpm, 119db at WOT.
16.No Muffler, 91db at idle, 103db at 2,000 rpm, MAX. (120+db).
 

Kurtis

New Member
Jul 4, 2003
79
0
0
Jul 16, 2007
#6
  • Jul 16, 2007
  • #6
91FoxSaleenGTLX said:
From what i've been reading lately.... Lt's with x pipe and 10 series or 40 series flowmasters.
Click to expand...

That's actually exactly what I have now....BBK l/t's into a dr. gas o/r x-pipe into a flowmaster american thunder catback. Definitely not as loud as some of the stangs I hear drivin by.
 

Kurtis

New Member
Jul 4, 2003
79
0
0
Jul 16, 2007
#7
  • Jul 16, 2007
  • #7
doing a little more research...apparently x-pipes and h-pipes are comparable in loudness and if anything x-pipes may be a little bit louder??

I'd love to keep the x-pipe on the car and just switch cat-backs! saves me mega $$.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jul 16, 2007
#8
  • Jul 16, 2007
  • #8
Perhaps these other loud stangs have a little more work done under the hood?!? I know my current exhaust setup (LT's O/R H, 40 series flows) would be a heck of a lot louder on a blown 331 and a heck of a lot quieter on a stock HCI 302. If you are already running LT's and an O/R X, then the only other thing you can do is change from a chambered muff to a straight through resonator. My brother runs SLP race resonators, and his car with just the muffs, stock H pipe with 2 cats cut out, is almost louder than my combo....sounds nasty at WOT. I will probably make the swap to SLP, Magnapacks, or race bullets pretty soon too.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Jul 16, 2007
#9
  • Jul 16, 2007
  • #9
Get some SLPs, toss on some dumps and for $200-300 you have a very loud set up.
 

Kurtis

New Member
Jul 4, 2003
79
0
0
Jul 16, 2007
#10
  • Jul 16, 2007
  • #10
hmmm.....i see.

so I guess I'm doin the best I can with header/midpipe combo (as far as loudness). anyone wanna trade flowmaster american thunder for an slp loudmouth system?
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Jul 16, 2007
#11
  • Jul 16, 2007
  • #11
Yes you are. My friend has that exact set up on his HCI 302. My car runs LTs, OR X, into dumped Spintechs and it is loud, but his trumps mine. Now whether or not it sounds good or just loud, thats opinion, but it will be about as loud as you can get with some kind of "muffler".
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jul 16, 2007
#12
  • Jul 16, 2007
  • #12
Mustank said:
Open headers straight up out of the hood. That's about the loudest you can get
Click to expand...


Hell yeah just route individual straight pipes right up from each exhaust port straight up through the hood. It doesn't get any more rock-n-roll than that
 
T

Tasandmnm

New Member
Jun 1, 2007
19
0
0
Jul 16, 2007
#13
  • Jul 16, 2007
  • #13
Yeah engine mods will make a lot of difference. I have a 93 Cobra with stock GT40 heads/intake/cam with FRPP shorties, pro chambers, and Mac mufflers and it sounds a lot meaner on my car than a guy I know with the same setup except he has Mac long tubes and E7 stock heads/cam/intake. It is actually a very large difference in sound, and I am sure cubic inches would also make a huge difference.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jul 16, 2007
#14
  • Jul 16, 2007
  • #14
Yeah, i had a friend who had the exact same exhaust setup as me from the headers back (all MAC, full lengths, pro chamber, flowpath cat-back) except my car was mostly stock and his was a blown 408...the two cars didn't sound anything alike.
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 16, 2007
#15
  • Jul 16, 2007
  • #15
Not tech moved to talk.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jul 16, 2007
#16
  • Jul 16, 2007
  • #16
Shorties, H-pipe, and SLP catback. Shorties are louder than long tubes. Open headers is the loudest, but that is just loud, not nice loud!!!
 

Dmarstroker

Member
Aug 8, 2006
116
1
19
Vancouver, WA
Jul 16, 2007
#17
  • Jul 16, 2007
  • #17
I dont know if its true, but from what I've heard is that short tube headers make your car sound a little louder down low as well as the h-pipe. And LT headers and an off-road x make it scream up top. Not really sure I have a short burnout clip on my sig of how mine sounds like.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jul 16, 2007
#18
  • Jul 16, 2007
  • #18
Dmarstroker said:
I dont know if its true, but from what I've heard is that short tube headers make your car sound a little louder down low as well as the h-pipe. And LT headers and an off-road x make it scream up top. Not really sure I have a short burnout clip on my sig of how mine sounds like.
Click to expand...


That's my experience....most people think full lengths equal louder, but not really. They equalize the exhaust pulses which can actually quiet down the exhaust note...again, just as my above post where a friend had the same exhaust setup as me, another friend used to have the mufflers that are on my car right now, but he ran shorties with them and they were louder on his car.


If i had to say what i think would be loudest, on a mostly STOCK car, i'd say shorties, an X pipe and some kind of resonator mufflers like SLP LM's or Race Bullets or even 1 chamber Flowmasters are pretty damn loud, all of them would be dumped. Also a trick if you wanna make things even louder, when you go to put dumps on the back of your mufflers, have them welded or clamp them on pointing towards the sides of the car.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Jul 16, 2007
#19
  • Jul 16, 2007
  • #19
My borla XS mufflers (just about the quietest muffler you can buy) with my hci was louder than most peoples flowmaster cars, before the hci most people didnt even know I had exhaust done even without cats. Engine mods make just about as big of a difference in exhaust volume and quality as changing exhaust setups.
 

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
Jul 16, 2007
#20
  • Jul 16, 2007
  • #20
Not that I have the loudest setup but I can say that an HCI combo makes a HUGE difference in volume. Im running a ported GT40 setup with an ecam, shortie headers, o/r H, and a magnaflow catback and it is significantly louder than my buddies setup with an Novi 1000, cobra intake, stock E7's, shorties, o/r X, and a mac catback. I would have figured it would be comparible with his supercharger and my GT40 irons (ported) but its not, not even close.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

C
Need MIL Eliminators?
  • crazyone64
  • May 18, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
164
SN95 4.6L Mustang Tech May 21, 2026
GOvert
G
J
Lost low end torque
  • JJ's90fox
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
801
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2025
Methodical
P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
976
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
S
New guy- first Stang- I love it !!
  • smid333
  • Mar 22, 2026
  • The Welcome Wagon
Replies
5
Views
181
The Welcome Wagon Mar 23, 2026
smid333
S
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?