• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Idle.. changes with mods?

  • Thread starter Thread starter AnthonyR23
  • Start date Start date Apr 19, 2007

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 19, 2007
#1
  • Apr 19, 2007
  • #1
Hi.. do certain mods change how low the engine can idle... I can't seem to get it to idle less than about 700 800 rpm.. and when I adjusted the set screw and re adjusted the tps to get around .9 volts I still can only get it down to about 700.. actually had the throttle stick because I think I had the set screw too low.. with underdrive pulleys.. headers... is it possible for the car to not be able to idle lower.. and does timing affect how low the car can idle?? I get code 13 which says that the engine could not perform the lower rpm test.. any ideas???
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 19, 2007
#2
  • Apr 19, 2007
  • #2
less than 700 rpm, why?
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 19, 2007
#3
  • Apr 19, 2007
  • #3
well I read that you should be able to set your idle screw to 600.. with the iac motor plug detached.. from there the iac adjusts the idle apparently...... anyways so after adjusting the screw.. you have to readjust the tps to make sure voltage is between I think .6 and 1.0

So.. I am getting this error code 13. That low rpm test could not be completed.. any ideas??
 
You must log in or register to reply here.

Similar threads

P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
183
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
866
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
G
Need tuning help with 4100 Carburetor
  • Gary’s 67
  • Aug 18, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
252
1965 - 1973 Classic Mustangs -General/Talk- Aug 22, 2026
manicmechanic007
2001 SVT Cobra slow return to idle speed
  • phil2001svt
  • Oct 21, 2026
  • SVT Tech Forum
Replies
3
Views
165
SVT Tech Forum Nov 2, 2026
phil2001svt
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
238
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?