• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Idle Problems-Different

  • Thread starter Thread starter meshoman
  • Start date Start date May 11, 2006
M

meshoman

New Member
Jan 9, 2004
8
0
2
May 11, 2006
#1
  • May 11, 2006
  • #1
I know everyone has read about a thousand idle problems, but... My car will not idle cold. It will start, run for a few seconds and stall. I can restart it and feather the gas to keep it running. It will then surge from about 500-1500 RPM, then after about 3 minutes, will idle rock solid. When first started it will also stumble like it's missing when you hit the gas. This also goes away after about 3 minutes. I have no codes, the ECT and ACT sensors read out fine when warm, I have checked for vacuum leaks everywhere and I've gone through the Probst, Ford Fuel Injection book trying to troubleshoot. O2 sensors are fairly old, but supposedly the computer doesn't look at those until they heat up. Plugs are new, ignition is new, plug wires are new and timing is set @ 14 deg. I got nothing. Any ideas? Thanks!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 11, 2006
#2
  • May 11, 2006
  • #2
See the sticky "Help me create the Surging Idle Checklist" at the top of the forum for help with your idle problems. The first post has all the updated answers.
 

pistonhead351

flim hunter
May 1, 2005
75
0
0
May 11, 2006
#3
  • May 11, 2006
  • #3
my best guess would be IAC. not letting enough air in.
 
M

meshoman

New Member
Jan 9, 2004
8
0
2
May 11, 2006
#4
  • May 11, 2006
  • #4
Wouldn't a bad/defective IAC cause idle problems all the time? My engine idles fine after a few minutes...
 

pistonhead351

flim hunter
May 1, 2005
75
0
0
May 11, 2006
#5
  • May 11, 2006
  • #5
im pretty sure that the IAC lets more air in the motor on startup for the first couple minutes then after that it does nothing.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 11, 2006
#6
  • May 11, 2006
  • #6
As said, the IAC is most critical at start up. The info in Jrichker's thread will provide answers and procedures.

Good luck.
 
M

meshoman

New Member
Jan 9, 2004
8
0
2
May 12, 2006
#7
  • May 12, 2006
  • #7
OK. I'll try going through jrichker's thread again. Thanks, guys...
 
M

meshoman

New Member
Jan 9, 2004
8
0
2
May 14, 2006
#8
  • May 14, 2006
  • #8
OK, I just replaced the IAC. No difference. I pulled the EGR valve and cleaned it. It seems the pintle may have a very slight leak when closed. Could this cause it to not idle, then idle perfect after a few minutes? Again, no codes, no vacuum leaks, everything else except O2's are new...
 
You must log in or register to reply here.

Similar threads

J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
204
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
M
Idle problem
  • miser143
  • Oct 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
201
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 11, 2026
CAMTWO1070
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
865
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
183
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?