• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Im at my wits end

  • Thread starter Thread starter 1994Vib.RedGT
  • Start date Start date Jul 24, 2006

1994Vib.RedGT

Member
Aug 19, 2004
585
0
16
Denver, CO
Jul 24, 2006
#1
  • Jul 24, 2006
  • #1
With this misfire/ hesitation deal

I know my #7 boot wire is burned, and Im working on testing that, but could minor burns on the boot wire cause a misfire?

I tested my EEC scan and if Im reading it correctly I get the system pass message. No error codes, no check engine light, nothing like that

Im assuming if I had a bad injector I would get an error code no?

I misses at part throttle and makes an awful clicking noise all throughout the RPM range. A loose header bolt would not cause this would it?
so what the hell is wrong with my car?
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jul 24, 2006
#2
  • Jul 24, 2006
  • #2
i just had 2 spark plug boots that were burned/melted.

about 1 1/2 years ago, i had a misfiring issue i was killing myself over. it turned out to be a spark plug boot that was burned/melted.

so yes, i know from experience that that can absolutely cause part throttle misfiring.

i also have had a loud clicking noise that was 100% caused by a loose header bolt. as soon as i tightened the bolt, the clicking was gone.
 

1TallMF

New Member
Apr 17, 2006
955
1
0
Montreal
Jul 24, 2006
#3
  • Jul 24, 2006
  • #3
subscribing.

I have had a similar problem with intermittent missing and I have done everything I can think of to get rid of it. I also have that light clicking sound at lower rpm's, and its not pinging.
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jul 24, 2006
#4
  • Jul 24, 2006
  • #4
another thing that might be worth trying is the TFI module. it's an easy swap, it doesn't cost much, and i was able to return mine when it turned out to not fix it.

check the last post here:
http://www.corral.net/forums/showthread.php?t=570660

would a bent pushrod cause a terrible clicking noise?
 

1994Vib.RedGT

Member
Aug 19, 2004
585
0
16
Denver, CO
Jul 24, 2006
#5
  • Jul 24, 2006
  • #5
obviosuly I dont know, but I dont think there is a bent pushrod, I had my mechanic check them out and he said they looked alright.
 

1994Vib.RedGT

Member
Aug 19, 2004
585
0
16
Denver, CO
Jul 24, 2006
#6
  • Jul 24, 2006
  • #6
also, the fuel pressure was set at 39 with the vaccum hose on; I dont know if this is correct, if not, could that cause misfiring/engine stuttering?
 

1994Vib.RedGT

Member
Aug 19, 2004
585
0
16
Denver, CO
Jul 25, 2006
#7
  • Jul 25, 2006
  • #7
tightening the exhaust up did nothing, the horrible ticking is still there. My dad thinks that the valves were set a little tight and its the sound of the valves closing against the seats, never heard of this problem though, so I dont know what to think there. This noise is driving me insane, It sounds kind of like a diesel, and sometimes the sound overpowers the exhaust, especially around 2500, and it only started after the H/C swap; so Im at a loss
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
695
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
651
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
496
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?