• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Inexpensive electric fan... Taurus, SN95, Proform or ??

  • Thread starter Thread starter Kerpal
  • Start date Start date Apr 2, 2005
K

Kerpal

New Member
Aug 9, 2004
400
0
0
Apr 2, 2005
#1
  • Apr 2, 2005
  • #1
I need to replace my cracked stock cooling fan, and am on somewhat of a tight budget, like sub $75 if possible. I've been looking at the SN95, Taurus and Proform fans, all of which are around the same price and seem to be reccomended. I'm sure any of them would cool my stock engine just fine with my Griffin radiator.

I'm mostly wondering which fan would draw the least power. I'm planning to install a 3g alt and eventually a DCC, but I'd like to have plenty of juice left to run my stereo system. Would any of the above fans run off my stock alt, even just for a few weeks until I get the 3g in?

Secondly, are all of those fans fairly easy to install? I don't really like the idea of wire ties through the radiator, would much rather use brackets if possible.
 

twolo4u2c2

5 Year Member
Apr 10, 2003
330
6
29
reading, PA
Apr 2, 2005
#2
  • Apr 2, 2005
  • #2
junkyard taurus fan. 10.00 at harrys u-pull it.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 2, 2005
#3
  • Apr 2, 2005
  • #3
not real sure on actual draw, but i think you would be hard pressed to beat the low draw (on low speed, which is pretty sufficient) of a 3.8L taurus fan. if you search Jerry Beach's posts, you can see the numbers he has posted for its draw (he used to, and still might, run it on a 2G alternator). he recently upgraded to a variable controller, but used a switch before that.

good luck.
 
K

Kerpal

New Member
Aug 9, 2004
400
0
0
Apr 3, 2005
#4
  • Apr 3, 2005
  • #4
Thanks, I'll do a search for his posts. Just typing in 'electric fan' brought up more threads than I could make sense of.

Is there a cheap way to have the fan on a temp control, until I can afford the DCC? If I just put it on a manual switch, I'd have to never turn it off, b/c soon enough I'd definately forget to turn it back on.
 

shttygtstang

New Member
Jun 2, 2004
978
0
0
Apr 3, 2005
#5
  • Apr 3, 2005
  • #5
Kerpal said:
Thanks, I'll do a search for his posts. Just typing in 'electric fan' brought up more threads than I could make sense of.

Is there a cheap way to have the fan on a temp control, until I can afford the DCC? If I just put it on a manual switch, I'd have to never turn it off, b/c soon enough I'd definately forget to turn it back on.
Click to expand...

also if you use a temp control switch youll be tapped fer power but be on the line of good n bad .
if you hard wire it on all the time you need a 3g alternator upgrade

*** edit read your post hissin you had it covered
 

twolo4u2c2

5 Year Member
Apr 10, 2003
330
6
29
reading, PA
Apr 3, 2005
#6
  • Apr 3, 2005
  • #6
HISSIN50 said:
not real sure on actual draw, but i think you would be hard pressed to beat the low draw (on low speed, which is pretty sufficient) of a 3.8L taurus fan. if you search Jerry Beach's posts, you can see the numbers he has posted for its draw (he used to, and still might, run it on a 2G alternator). he recently upgraded to a variable controller, but used a switch before that.

good luck.
Click to expand...


the taurus fan draws 70 amps. Yet this is alot. It actually pulls the car forward it pulls that much air.
 
R

ratrapp

New Member
Apr 24, 2004
510
0
0
buena vista,va
Apr 3, 2005
#7
  • Apr 3, 2005
  • #7
people talk bad about the proform fan but i've had mine for almost 2 years and it's been flawless.i ran it with my stock alt. before upgrading to a 3g and it was fine.i don't have a killer stereo or a/c though.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 3, 2005
#8
  • Apr 3, 2005
  • #8
twolo4u2c2 said:
the taurus fan draws 70 amps. Yet this is alot. It actually pulls the car forward it pulls that much air.
Click to expand...
when and how was this measured? what speed?
most of us are concerned with the sustained power usage, not start up, which is often double or triple the sustained draw. if your fan draws a sustained 70 amps on low speed, i would be worried.

Mr Baskin should be able to provide specs. the 3.8L taurus fan is one that is offered in his packages, as i recall.

Kerp, some get away running a 20 buck variable controller from the parts store. they can leave something to be desired accuracy-wise, but work for some folks alright. make sure you have a good temp gauge though.

good luck.
 

twolo4u2c2

5 Year Member
Apr 10, 2003
330
6
29
reading, PA
Apr 3, 2005
#9
  • Apr 3, 2005
  • #9
that 70 amp was on high speed. on a 96 taurus fan. And I didnt think so either but it does melt a 30amp relay real quick.(from experience) hook two relays and they still melt but just takes a little while. I dunno if thats what they are soposed to draw or Thats just the one I have. But it does pull craploads of air.
 
I

Insane3D

New Member
Jul 21, 2004
310
0
0
Apr 3, 2005
#10
  • Apr 3, 2005
  • #10
If you are comfortable with wiring, you can get this dual 11" Ramcharger fan for $80.

http://www.ramchargers.com/cgi-bin/...13025&cgrfnbr=36136&cgmenbr=541&page=category

If you want to save time and hassle, you can buy it with a pre-wired weatherproof harness with lighted switch for $140.

http://www.ramchargers.com/cgi-bin/...13024&cgrfnbr=36136&cgmenbr=541&page=category

 
T

ty-rone

New Member
Mar 30, 2005
77
0
0
Apr 3, 2005
#11
  • Apr 3, 2005
  • #11
I was running a fan from a 91 cavalier or somthing like that which worked well for me. I never had any cooling issues, and I used the temperature activated switch. I forget how exactly I mounted it up, but I know I used bolts, just took a bit of time customizing.
 
You must log in or register to reply here.

Similar threads

M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
681
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
123
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
B
Saying Hi
  • BriansNSane
  • Dec 20, 2025
  • The Welcome Wagon
Replies
5
Views
290
The Welcome Wagon Dec 21, 2025
BriansNSane
B
W
Electrical 91 GT Alternator Replacement Question
  • willrh111
  • Oct 22, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
370
Fox 5.0 Mustang Tech Oct 23, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?