• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Injector tech, part 2

  • Thread starter Thread starter Black1987Stang
  • Start date Start date Jan 30, 2006

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 30, 2006
#1
  • Jan 30, 2006
  • #1
Ill be changing one of my injectors pretty soon, im 99% the one is leaking but i want to verify this before putting the new one in. My question is if i take the fuel rail off the lower intake and with the injectors still in the rail, if i prime the fuel pump, will the injectors pop out and spray gas all over.....I want to see if its leaking from the pintle when the pumps on...I was going to try this with the driver side rail still bolted in but the passenger half out of the intake, Would i be able to hold the 4 injectors by hand and prime the pump without having gas spray all over? Thanks
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Jan 30, 2006
#2
  • Jan 30, 2006
  • #2
My thinking is that it'll spray gas out without the pump primed unless the rail pressure is relieved. Mine dumped gas out when I replaced my lower intake because I forgot to relieve the system pressure.

Not sure if I answered your question or not though.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 30, 2006
#3
  • Jan 30, 2006
  • #3
Removing the injectors from the lower manifold and applying fuel pressure will cause them to pop out of the injector rail. Nasty mess and even worse fire hazard.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 30, 2006
#4
  • Jan 30, 2006
  • #4
jrichker said:
Removing the injectors from the lower manifold and applying fuel pressure will cause them to pop out of the injector rail. Nasty mess and even worse fire hazard.
Click to expand...


Ok thanks, thats what i need to know...I want to try your air compressor and soapy water trick to see if its leaking but I don't have a compressor. Ill just replace it and see if it still makes that noise I was getting with the old one.
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
523
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
J
Engine Running like crap :(
  • justadude07
  • Sep 27, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
535
Fox 5.0 Mustang Tech Oct 19, 2025
DadLife0724
Electrical 88 EEC Injectors batch firing ?
  • Dustin 86GT
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
660
Fox 5.0 Mustang Tech Jan 8, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?