• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Injectors???

  • Thread starter Thread starter 1Slow90coupe
  • Start date Start date Nov 14, 2005
1

1Slow90coupe

New Member
Oct 18, 2005
145
0
0
Nov 14, 2005
#1
  • Nov 14, 2005
  • #1
My brother has an 88GT convert. It does not have mass air. He put a CAI and exhaust on it. A couple of the fuel injectors are bad so he is going to replace them. What size are the stock ones, and how would it affect it if he went up one size? Just trying not to waste money since more mods to come later.
 

mrswivlepants

New Member
Aug 13, 2003
93
0
0
Nov 14, 2005
#2
  • Nov 14, 2005
  • #2
Stock injectors are 19lb/hr. Not sure how the jumb to 24 pounders would effect a speed density car. I've heard they don't take well to changes without properly tuning but I could be way off on that.

Check out this thread....DMan in the second post doesn't think it's a good idea on that combo which is much beefier than what your brother is currently running.

http://forums.stangnet.com/showthread.php?t=552709&highlight=injectors+speed+density

On another note, you don't need to go up a size until something like 300 rwhp, so keep that in mind.
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Nov 14, 2005
#3
  • Nov 14, 2005
  • #3
24s would be too much for that car even if it had mass air.

Stay with 19s until you do modifications to warrant it.

A couple years ago I had an intake, TB, MAF, full exhaust & 5-6lb. supercharger on my car with 19# injectors, and they were enough for normal driving with the occasional heavy foot.
 
1

1Slow90coupe

New Member
Oct 18, 2005
145
0
0
Nov 15, 2005
#4
  • Nov 15, 2005
  • #4
Thanks for the info. I will tell him to stick with the original.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Nov 15, 2005
#5
  • Nov 15, 2005
  • #5
when you hit 300 horse, consider the change to 24's.
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
183
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
518
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
246
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
841
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
320
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?