Engine Inline 6 Build With Alum Head.

Go Pens · Jun 1, 2013

This is some pics of my I6 build. It has a Alum head from Classic Iines, 1.65 roller rockers, 264/264 110 clay smith cam, intake from Spectre, DUI and many parts from Summit. It will be dyno tested with the c4 and then a T5. Still have to finish it up waiting on pushrods and a few small parts.

68keyblr · Jun 1, 2013

Coolest project I've seen in a long time! Spectre makes that intake manifold? It's been several years since we sold my wife's '67 convertible with the 200 six, at that time the only good intake manifold was off of the Aussie 250. How much power are you expecting to make?

I always thought it would be cool to put a turbo on the I6. Keep the updates coming

Falcon79 · Jun 1, 2013

Man, if they had this kind of aftermarket stuff for the I6 15 years ago, i might have kept mine and done this kind of build. Kudos to you for giving us something different to look at! Keep the updates coming.

jetmech807 · Jun 2, 2013

Falcon79 said:
Man, if they had this kind of aftermarket stuff for the I6 15 years ago, i might have kept mine and done this kind of build. Kudos to you for giving us something different to look at! Keep the updates coming.

They did. Clifford has been around for decades. Nobody ever seemed to know about them though. I've seen I-6's in alterds, dragsters, comp eliminator cars, etc. That was in the late 80's.

Sent from my EVO using Tapatalk 2

woodsnake · Jun 2, 2013

Very cool! Should have a very interesting exhaust note to it...

Go Pens · Jun 2, 2013

It is not going to me alot of HP but about 180 to 200 to the rear wheels. I just wanted to have something different and I can always turbo or super charge it later. It also will be a article in Mustang Monthly later this year.

Go Pens · Jun 2, 2013

woodsnake said:
Very cool! Should have a very interesting exhaust note to it...

Yes with the headers and 2" dual exhaust with an x pipe it sounds close to a V8 right now. I can not wait to hear how it sounds after all the new parts.

68keyblr · Jun 2, 2013

Interesting, it looks like both the head and the intake have bosses for port fuel injection. That would be a really cool project for Megasquirt, Ahhh someday....

rbohm · Jun 2, 2013

nice build. have you shown it over at fordsix.com yet?

rbohm · Jun 2, 2013

by the way, clifford was supposedly designing an aluminum head for the small ford six for years, but it never materialized until mike at classicinlines.com took up the challenge and got one done.

Rusty67 · Jun 2, 2013

Too cool. I love straight six motors. I would LOVE to see a turbo in there !

66sprint6 · Jun 7, 2013

HUGE six banger fan here obviously, love how clean yours is. Love the garage too, dang how I wish I could keep mine as nice!!! Keep it goin, let us know what she puts down and dont worry if the numbers are low, mine with a simple big log head, holley 2 barrel and dual out header was a ton of fun to drive for what it was, especially with the T5. Now with the turbo its SILLY!

Matt

Hack · Jun 12, 2013

Cool build! Props to you for choosing to do what you want.

Got any photos of the intake, exhaust ports and the chambers on that head?

rbohm · Jun 12, 2013

Hack said:
Cool build! Props to you for choosing to do what you want.

Got any photos of the intake, exhaust ports and the chambers on that head?

here are a couple of links for you hack;

http://www.classicinlines.com/AlumSpecs.asp

http://www.classicinlines.com/CylHeadCuts.asp

Engine Inline 6 Build With Alum Head.

Go Pens

Member

68keyblr

Falcon79

Active Member

jetmech807

woodsnake

Go Pens

Member

Go Pens

Member

68keyblr

rbohm

rbohm

Rusty67

66sprint6

Member

Hack

rbohm

Similar threads

Engine Inline 6 Build With Alum Head.

Member

Active Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency