Installed an alpine head unit w/mach 460, have some issues..

D

DeathMetal

Member

Jun 3, 2004

3

2

13

Wisconsin

Mar 8, 2006

#1

• Mar 8, 2006

• #1

I have a 2001 mustang with the mach 460 and just put in a new Alpine head unit. I used the metra 70-5509 harness that I read about on this forum.

The problems I have are:

1. When the engine is running and the stereo is off, I hear some noise coming through the speakers. When I turn the stereo on it seems to go away.

2. Whenever I turn the stereo on, I hear a loud pop from the amp speakers

 

D

DeathMetal

Member

Jun 3, 2004

3

2

13

Wisconsin

Mar 8, 2006

#2

• Mar 8, 2006

• #2

Well, I did some searching on google and found out the engine noise "alternator whine" and is probably caused by too many things connected to the same ground. It's not a good idea to use the ground in the cars harness, it's better to connect the radio's ground wire to the chassis/firewall or something. So I'm going to try that tomorrow.

I also baught a pulse timer relay from ebay, which should delay the amp from turning on. This will make it not turn on untill after the signal is sent that makes the loud pop noise.

What I want to know is, does anyone have experience with timer relays? I suppose i just splice it into the amp turn on wire, but what wires would I use on the relay? It looks like it has quite a few on there.

 

S&B

I hate my CT. :(

10 Year Member

Dec 18, 2005

1,634

695

204

Cheesehead

Mar 9, 2006

#3

• Mar 9, 2006

• #3

never heard of that relay thing,

you stayed with the stock amps or did you replace those as well?

 

D

DeathMetal

Member

Jun 3, 2004

3

2

13

Wisconsin

Mar 9, 2006

#4

• Mar 9, 2006

• #4

All stock except for the head unit.

 

R

Red2000GT

Founding Member

Sep 10, 2000

2,450

0

46

Regina,Sask.Canada

Mar 10, 2006

#5

• Mar 10, 2006

• #5

I've worked with the timer relays but there's a few versions out there. If you provide a diagram or pic with the relay then I can draw something up for you.

 

D

DeathMetal

Member

Jun 3, 2004

3

2

13

Wisconsin

Mar 14, 2006

#6

• Mar 14, 2006

• #6

View attachment 483781


I know that is hard to read. THe orange wire is normally closed, the brown wire is normally open, the yellow wire is common, the black w/stripe wire is the trigger input, black is ground, and red is a +12 VDC ground.

There is also a blue loop wire, which uncut will trigger upon recieving negative and cut will trigger upon negative going away.
View attachment 483783


Here is a side view, this must be the timer adjustment.
View attachment 483785

 

D

DeathMetal

Member

Jun 3, 2004

3

2

13

Wisconsin

Mar 14, 2006

#7

• Mar 14, 2006

• #7

Ok, I'm going to guess and say that I should connect the remote turn on wire from the head unit to the Black/white striped wire (trigger input) on the relay. Then I connect the orange wire (normally closed) on the relay to the amps power wire.

Does this sound right? anyone?

Also why are there two amp power wires and two ground wires on the amp harness? I'm guessing there are two amps in the 460 system?