- Jul 17, 2001
- 485
- 0
- 0
I bought a used Maximum Motorsports Strut tower brace from fivepointohgt. Rich is a super nice guy that even insured my UPS. I bought new hardware, and installed it today. The brace was a little hard to get into place, (I worked alone on this one) but the install went fairly smoothly. I was able to retain the stock location of things like the vac tree, and even the little security siren horn, but I had to drop the MAF Meter bracket down 1/2" to clear the strut tower brace.
You really have to use WD-40 like they say for the install, because my bits were a bit dull, and the WD helped cool things off.
I don't have my digital camera at the moment, but I will post pictures tomorrow morning. I even called Maximum Motorsports, and they are sending me a new sticker free of charge.
There are a bunch of Speed bumps in the neighborhood, and after the install, there was NO cracking, or even bending. The front is now as ridgid as a gorilla!
I will get some pics up later.
Maximum Motorsports!
You really have to use WD-40 like they say for the install, because my bits were a bit dull, and the WD helped cool things off.
I don't have my digital camera at the moment, but I will post pictures tomorrow morning. I even called Maximum Motorsports, and they are sending me a new sticker free of charge.
There are a bunch of Speed bumps in the neighborhood, and after the install, there was NO cracking, or even bending. The front is now as ridgid as a gorilla!
I will get some pics up later.
Maximum Motorsports!
