Well, I finally got this stereo thing figured out. Bypassed the factory amp and everything is good. The only problem I have now is that the positive battery post sparks when I put the cable on. It does not do this when I disconnect the radio. I followed the install directions, soldered, and used heat shrinks to make sure it stays in good condition. I don't see what the problem could be with the radio wiring harness, maybe someone can help me out? Thanks.
Installed Stereo, Battery Draw
- Thread starter 1989MustangLX
- Start date
89MustangGX
I have nothing productive to add!
A little spark is not uncommon. Your radio does draw power (clock), but it should not be enough to worry about.
2badazzstangs
New Member
it shouldnt be a problem, this happened a lot at circuit city when i used to work there. You may want to check the ground at the radio though
Daniel50
New Member
5.0 con-vert
No soup for you, Joe Rogan!!!
Daniel50 said:
That, and the fact that the factory amp is weak compared to the head units that are made these days. I think its like a 35w amp for all the speakers!
5.0 con-vert said:That, and the fact that the factory amp is weak compared to the head units that are made these days. I think its like a 35w amp for all the speakers!
Most of them are 35w max! usually around 11 to 14 rms. Most companies put the MAX wattage on their product. Just like a little jensen amp does not up out 5000 amps.
