So I just finishing up my stewart wp install and I noticed an issue with the water pump pulley hitting the harmonic balancer. I run ASP underdrive pullies but I've never had a problem when running the stock water pump. I'm not sure what the issue is because the stewart pump looks exactly like the stock unit. Anyone else run into this problem when swapping to the stewart water pump?
I'm assuming the stock pulley would work because its smaller. I'd like to keep the ASP waterpump on and not have to swap back to stock especially since I don't have the stock pulley.
I'm assuming the stock pulley would work because its smaller. I'd like to keep the ASP waterpump on and not have to swap back to stock especially since I don't have the stock pulley.