9 95saleen95 New Member May 31, 2004 27 0 0 Sacramento, CA Aug 11, 2005 #1 Aug 11, 2005 #1 What wires on the distributer harness do I splice the purple and green wires from the 6A box into? Thanks.
What wires on the distributer harness do I splice the purple and green wires from the 6A box into? Thanks.
bjl95mustang Founding Member Jan 18, 2000 1,495 0 36 Austin,TX Aug 11, 2005 #2 Aug 11, 2005 #2 You splice the wires at the coil. there are instructions on the msd web site.
9 95saleen95 New Member May 31, 2004 27 0 0 Sacramento, CA Aug 11, 2005 #3 Aug 11, 2005 #3 The orange and black go to the coil, but the purple and green go to the distributer. Those are what I cant figure out.
The orange and black go to the coil, but the purple and green go to the distributer. Those are what I cant figure out.
bjl95mustang Founding Member Jan 18, 2000 1,495 0 36 Austin,TX Aug 11, 2005 #4 Aug 11, 2005 #4 Ok, 2 wires are for the power 1 ground and 1 positave. the other 4 go to the coil. 2 from the coil plug to the box then the other 2 from the box too the coil.
Ok, 2 wires are for the power 1 ground and 1 positave. the other 4 go to the coil. 2 from the coil plug to the box then the other 2 from the box too the coil.