installing a AFR gauge some help please??!!

[fish254]

i just want to know what wire to tape here is the diagram for wiring


javascriptop("0900823d801ddb57","gif_large","no")

 

[fish254]

http://www.autozone.com/images/cds/gif/large/0900823d801ddb57.gif

thats the link

 

[HISSIN50]

In that diagram, it looks to be red/blk (left) and grey/lt blue (right).

Good luck.

 

[fish254]

is that inside the car where it plugs into the pcm??

 

[fish254]

i really want to wire it from inside the car it will make it so easy any one

 

[HISSIN50]

It will be the same color wires as I recall. Look at Pins 43 and 44 (left/right, respectively).

Good luck.

 

[95cobraguy]

i really want to wire it from inside the car it will make it so easy any one

just run the wire from the gauge to the proper pin at the computer, i remeber it being the gray wire with blue stripe. i used a scotchlock connector to make the connection. your going to have separate the wires a bit to make a solid connection as the wires are wound up tight at the computer connector.

 

[HISSIN50]

And/or run a wire from both pins (left and right O2's) to a SPDT switch so you can toggle from bank to bank.

Good luck.