Installing New Injector Clip

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
1
46
Big Stone Gap, VA
I got some new squeeze release injector clips to replace my old side pry style stockers(most are broke anyways). How are injector clips wired in, is one wire a power wire and the other a ground or what? Never messed with the injector wiring to know. Thanks
 
One wire is 12v, the other goes to the computer. Make sure you note which wire is which when you cut out the old connector. Also consider dialectric grease for the connections.
 
There's a common wire color and a seperate wire color for each injector connector. I'm thinking it's red, as it was in my case, I put new clips on my harness not too long ago, well worth it too.
 
Okay, if my memory serves me correctly the RED wire is hot all the time. Yet the other wire is a ground that is switched in the computer. Thus, 12+ on the RED all the time, injector needs to fire, ground is sent through the computer to "fire" the injector. Therefore, if you have a short to ground on the 12- side of one of the injectors, the injector will hang open.