Installing X-Pipe on 2000. What should I expect?

AmBo · Feb 28, 2007

I'm going to have a Bassani X-Pipe put on soon. I currently have a stock-H pipe. Do I need anything for the MILs or o2 sesors? I THINK the 2000s are a straight up, pull out, put in. No?

All your help is appreciated

stangman · Feb 28, 2007

expect the passenger side bolts to be a pita, other than that it's pretty straight forward, just make sure to have a 7/8 wrench for the o2's

flyboy86 · Feb 28, 2007

Be sure to let your exhaust fully cool down. I was in a hurry, didn't let it cool down all the way, and that is what I think caused the header stud to shear off. Also, I remember the o2 sensor being 22 mm? Maybe I was smokin crack though.

AmBo · Feb 28, 2007

Yea, I'm aware of the passenger header bolt. That's the reason I'm having my mechanic doing it.

So the o2 sensors come out and go right back in the new pipe right? Only 2, not 4 of them, yes?

four six · Feb 28, 2007

I think there is 4 o2 sensors, I think. The MILs go on the back 2 also

AmBo · Feb 28, 2007

Let me rephrase what I'm asking:

Is there anything additional that I need to complete this install? Like I know 02+ stangs need MIL extensions or something like that. Do 2000s need anything like this? Or will I be able to rip out the 6-catted H and throw in my X pipe?

00PearlGT · Feb 28, 2007

Really not a terrible install. I recently had to install the stock h pipe which can be pretty heavy when its just you under the car. Passenger bolts were definately a pita but once you get those off the removal is simple. For the install I suggest you take a jack and put it under the back end of the pipe that way once you thread in some of the header bolts its fairly level. Also the jack does great to help with the weight if you're doing it alone. Good luck

bakos24 · Feb 28, 2007

AmBo said:
Let me rephrase what I'm asking:

Is there anything additional that I need to complete this install? Like I know 02+ stangs need MIL extensions or something like that. Do 2000s need anything like this? Or will I be able to rip out the 6-catted H and throw in my X pipe?

No, you will not need the extensions. If its an off road X then I would get some mil eliminators, other than that, off and on it goes.

96BlueStangGT · Feb 28, 2007

All cars 96-present need MIL's (not extentions) unless you turn the back o2's off via tune. The o2's take either a 22mm or 23mm wrench.

It's a very easy install.

Saleen311 · Feb 28, 2007

i would plan on buying a flange gasket

96BlueStangGT · Feb 28, 2007

Saleen311 said:
i would plan on buying a flange gasket

Yes, that's a good idea. Passenger side gasket.

flyboy86 · Feb 28, 2007

96BlueStangGT said:
Yes, that's a good idea. Passenger side gasket.

My mac h-pipe came with one. idk bout the Bassani though.

GToddyT5 · Feb 28, 2007

AmBo said:
I'm going to have a Bassani X-Pipe put on soon.

Bout time.

96BlueStangGT · Feb 28, 2007

flyboy86 said:
My mac h-pipe came with one. idk bout the Bassani though.

Those Mac gaskets are only 1% of the quality of a Ford OEM gasket though. They tend to burn up and blow out unless Mac changed the way they make them.

Ambo's x pipe is used so i don't think it came with one.

bullitt_2620 · Feb 28, 2007

You should only have 4 cats, I thought there was 6 through 98 I didn't need extensions on my o2's, just threw the mils on the back ones and plug em back in. Off road FTMFW!!!

AmBo · Feb 28, 2007

96BlueStangGT said:
Those Mac gaskets are only 1% of the quality of a Ford OEM gasket though. They tend to burn up and blow out unless Mac changed the way they make them.

Ambo's x pipe is used so i don't think it came with one.

Yea, mine didn't come with any gaskets Should I go to randy and pick up two gaskets?

96BlueStangGT · Feb 28, 2007

There is only one gasket, it's on the passenger side.

AmBo · Feb 28, 2007

96BlueStangGT said:
There is only one gasket, it's on the passenger side.

And I should get a ford oem gasket?

streetstang03 · Feb 28, 2007

yes, its like $7 at the stealership

tomustang · Feb 28, 2007

flyboy86 said:
Also, I remember the o2 sensor being 22 mm? Maybe I was smokin crack though.

The extensions are needed for 2004 models

Ambo make sure you disconnect the battery when you do this, the starter is right there (shock-shock) when you're trying to unbolt the passanger side pipes off

Installing X-Pipe on 2000. What should I expect?

AmBo

Active Member

stangman

flyboy86

New Member

AmBo

Active Member

four six

Member

AmBo

Active Member

00PearlGT

Banned

bakos24

I find there is nothing better than a tasty wiener

96BlueStangGT

Member

Saleen311

New Member

96BlueStangGT

Member

flyboy86

New Member

GToddyT5

96BlueStangGT

Member

bullitt_2620

Member

AmBo

Active Member

96BlueStangGT

Member

AmBo

Active Member

streetstang03

unModerator

tomustang

Psychotic Member

Similar threads

Installing X-Pipe on 2000. What should I expect?

Active Member

New Member

Active Member

Member

Active Member

Banned

I find there is nothing better than a tasty wiener

Member

New Member

Member

New Member

Member

Member

Active Member

Member

Active Member

unModerator

Psychotic Member

Similar threads

Privacy & Transparency

Privacy & Transparency