With a boring old 302 with mods listed and a Vortech blower, what would be a better choice? The Performer or Performer RPM? What would make the best power?
Intake Choices
- Thread starter FlyBy763
- Start date
94-302-vert
Active Member
What are the future plans for the motor?
Are you thinking heads and cam in the future too or just to do the intake?
Are you thinking heads and cam in the future too or just to do the intake?
94-302-vert said:
Hopefully eventually there will be heads and cam...but probably not for a while.
94-302-vert
Active Member
IF not for a while go cheap for now.. I would vote used cobra or explorer intake, save the few hundred until it will really matter...
WhiteDevil
New Member
Rootus
Officially Addicted
If I were in your shoes, and had to choose between the Performer and RPM, I'd go with the regular Performer. The centrifugal blower won't help you on the bottom end, if anything it'll hurt, so you want as much torque as possible. The RPM is meant to rev -- and by the time you get up where it will benefit you, you're forcing the air anyway.
Dave
Dave
Rootus said:If I were in your shoes, and had to choose between the Performer and RPM, I'd go with the regular Performer. The centrifugal blower won't help you on the bottom end, if anything it'll hurt, so you want as much torque as possible. The RPM is meant to rev -- and by the time you get up where it will benefit you, you're forcing the air anyway.
Dave
Thats what I was thinking...and I could always buy the RPM upper latter if I wanted to...
Similar threads
- Poll
