• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

is a cam worth the time?

  • Thread starter Thread starter miller92063
  • Start date Start date Feb 21, 2006
M

miller92063

Member
Oct 12, 2005
253
0
16
Nebraska
Feb 21, 2006
#1
  • Feb 21, 2006
  • #1
is a cam at this time worth the time to take the engine apart to get it in. is the pain to power gain enough to do it. Or should i just wait untill i get heads and intake?


Thank you!
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Feb 21, 2006
#2
  • Feb 21, 2006
  • #2
The cam isnt a restriction at this point for you, so i would wait until you upgrade the heads/intake to do the cam. A intake would be good for now...or pullies, or gears, or a lot of other stuff but i dont know what ya got already....no sig with mods.
 

xc_myers_06

New Member
Aug 6, 2004
64
0
0
Nebraska
Feb 21, 2006
#3
  • Feb 21, 2006
  • #3
i would say to wait until you get heads and intake because you gotta yank out the whole engine to dis-assemble it and the cam is all the way towards the bottom. it would be a great addition though but adding power adders would be like gears, cold air intake, underdrive pulleys, aluminum driveshaft, etc. those are all pretty simple bolt-ons that add decent power for there easiness to install
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Feb 21, 2006
#4
  • Feb 21, 2006
  • #4
xc_myers_06 said:
i would say to wait until you get heads and intake because you gotta yank out the whole engine to dis-assemble it and the cam is all the way towards the bottom. it would be a great addition though but adding power adders would be like gears, cold air intake, underdrive pulleys, aluminum driveshaft, etc. those are all pretty simple bolt-ons that add decent power for there easiness to install
Click to expand...


Cam can easily be done in car. Just gotta take out the radiator and condensor and there is enough room. And i dont think it would be a great addition with stock heads...and the intake really chokes it off. The stock cam and cobra cams are actually pretty decent i think..especially with like a 1.7 rocker. But like we have said, there are other places that need the upgrades more than the cam. And the cost/power gained ratio will be higher with other parts.
 
You must log in or register to reply here.

Similar threads

Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
705
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
C
Detroit--swap meets??
  • chazmanaz
  • Nov 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
98
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 4, 2025
chazmanaz
C
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
383
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
G
Need tuning help with 4100 Carburetor
  • Gary’s 67
  • Aug 18, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
244
1965 - 1973 Classic Mustangs -General/Talk- Aug 22, 2026
manicmechanic007
D
N/A build on fresh stock 302
  • djcarrot
  • Oct 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
426
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?