• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Is anyone using wheel spacers?

  • Thread starter Thread starter GRGT1994
  • Start date Start date Nov 13, 2004
  • 1
  • 2
Next
1 of 2 Next Last

GRGT1994

New Member
Sep 22, 2004
1,034
0
0
Nov 13, 2004
#1
  • Nov 13, 2004
  • #1
Is anyong using these?

I have 17" by 8" wheels with 255/55/17 tires, and the rears just look like they are too far in. It's got that look of a kid wearing grandpa's hat, swimming in it.

Here is an example: http://secure.50resto.com/product1.cfm?SID=1&Product_ID=2479&Category_ID=257
 
J

jwater7

New Member
Oct 9, 2004
104
0
0
Nov 14, 2004
#2
  • Nov 14, 2004
  • #2
I have similar tires, but I don't have a problem with the look.
I'd rather trade look for the possibility of messing things up in the rear.
I do have spacers in the front though, but only because it has been lowered, and they will rub otherwise.
My opinion: don't get them unless for a mechanical issue.
 

AutobahnStang

Member
Mar 23, 2003
84
0
6
Nov 14, 2004
#3
  • Nov 14, 2004
  • #3
I used 1" spacers on my 17x9 wheels and they didn't mess anything up even at my freaquent 100mph+ runs on the Bahn . I used some similar to the H&R ones for over two years. They have their own wheel studs so there is no need for to replace your current studs.
 

AutobahnStang

Member
Mar 23, 2003
84
0
6
Nov 14, 2004
#4
  • Nov 14, 2004
  • #4
These are a little bit more expensive but they are great quality:

http://www.maximummotorsports.com/spacers.asp

They are also TUV and DOT certified.
 

'94ChickStang

Member
Sep 27, 2004
301
0
17
northern ca
Nov 14, 2004
#5
  • Nov 14, 2004
  • #5
I've got 1" H & R's in the rear, great. Makes the a** look less fat and just a bit meaner. 255's will be just about flush with the well.
 

Black Stampede

Founding Member
Sep 3, 2002
1,811
2
39
Grand Rapids, MI
Nov 14, 2004
#6
  • Nov 14, 2004
  • #6
jwater7 said:
I'd rather trade look for the possibility of messing things up in the rear.

My opinion: don't get them unless for a mechanical issue.
Click to expand...

No offense, but dont say things that just arent true. Wheel spacers do NOTHING to compromise the mechanical condition of a car.

To the thread starter: Get some H&Rs. They are VERY high quality and I love mine. I have 1 3/8 inch and they are perfect on my 245s on 17x8 '98 cobras.
 

GRGT1994

New Member
Sep 22, 2004
1,034
0
0
Nov 14, 2004
#7
  • Nov 14, 2004
  • #7
Hey thanks for the thoughts.

94ChickStang and Black Stampede: Could you post some pics here? What width tire are you running ChickStang?

Anyone else with pics of their car's stance with spacers would be much appreciated (please note wheel and tire size).
 

94GTStang

Founding Member
Oct 26, 2001
1,631
0
36
Oklahoma City
Nov 14, 2004
#8
  • Nov 14, 2004
  • #8
I would be interested in seeing the wheel spacer on some 245/45/17's as well.
 
H

HazMat404

Founding Member
May 24, 2002
1,749
0
36
Nov 14, 2004
#9
  • Nov 14, 2004
  • #9
i had mine for awhile til i was a complete dope one day and forgot to tighten the bolts up to the hug from the spacer...well we all know what happened then. my wheel passed me up going about 50mph. havent put them back on yet but im debating on it again. just make sure you double and triple check them and have a friend double check. they do look freakin awesome with my 17x8 98 cobra wheels with 245's
 
J

jwater7

New Member
Oct 9, 2004
104
0
0
Nov 14, 2004
#10
  • Nov 14, 2004
  • #10
Black Stampede said:
No offense, but dont say things that just arent true. Wheel spacers do NOTHING to compromise the mechanical condition of a car.
Click to expand...

HazMat404 said:
i had mine for awhile til i was a complete dope one day and forgot to tighten the bolts up to the hug from the spacer...
Click to expand...

Case in point...If Les Schwab won't work on your tires because they've got spacers, there's a reason. I think it may come down to more of an opinion than a fact, but spacers can cause problems just like any aftermarket stuff. For instance they're known to loosen nuts.

BUT, back to the discussion. If you're simply looking for the "look" and you are cautious to maintain them, like anything else, then get them.
 

'94ChickStang

Member
Sep 27, 2004
301
0
17
northern ca
Nov 14, 2004
#11
  • Nov 14, 2004
  • #11
GRGT1994 said:
Hey thanks for the thoughts.

94ChickStang and Black Stampede: Could you post some pics here? What width tire are you running ChickStang?

Anyone else with pics of their car's stance with spacers would be much appreciated (please note wheel and tire size).
Click to expand...


I had the 225/55's w/ ponies and they looked great, but just got 275's and new rims. Can't get the spacers in until I shave the original studs down a bit b/c of the rims....I'll post pics soon when I' m done, but they may stick out too far now, we'll see.
 
H

HazMat404

Founding Member
May 24, 2002
1,749
0
36
Nov 14, 2004
#12
  • Nov 14, 2004
  • #12
here is my before and after. i looked a ton better in person and i am thinking about doing it again but i never ever ever want to have to deal with what happened to me before. id rather have longer studs installed and have locking studs on there or something. i was even debating on putting on some lock tite just so those suckers stay on for sure. also, my tires are 245





 

Black Stampede

Founding Member
Sep 3, 2002
1,811
2
39
Grand Rapids, MI
Nov 14, 2004
#13
  • Nov 14, 2004
  • #13
jwater7 said:
Case in point...If Les Schwab won't work on your tires because they've got spacers, there's a reason. I think it may come down to more of an opinion than a fact, but spacers can cause problems just like any aftermarket stuff. For instance they're known to loosen nuts.
Click to expand...

That is totally irrelevent. The problem he had was do to his human error (no offense hazmat) NOT the spacers problem. If you are worried about stuff like that why dont you get all paranoid about a terrorist blowing your car up too while you're at it.
 
H

HazMat404

Founding Member
May 24, 2002
1,749
0
36
Nov 14, 2004
#14
  • Nov 14, 2004
  • #14
nope, none taken at all. ive heard of people sayin that they the bolts tend to walk off of the spacers but i dont see that happening because that would mean that wheels would be coming off anyways. it was pure stupidity on my part cause i wanted to hit the road and didnt double/triple check it. unless you are makin some big power, then i dont see much of a problem with spacers
 

GRGT1994

New Member
Sep 22, 2004
1,034
0
0
Nov 14, 2004
#15
  • Nov 14, 2004
  • #15
Damn HazMat404, that sure does clean 'er up. Looked nice that way.

I'm gonna do it too.

BTW, your car is a perfect example - at least for me. My car is spitting image to yours (save the lowering kit, black accents and rice hater paraphernalia)
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Nov 14, 2004
#16
  • Nov 14, 2004
  • #16


heres what mine looks like from behind. 1" spacers. don't know who's they are, i think the H&Rs though, but not sure. the wheels are 17x9. Comp T/A 275/40/17s if memory serves me right. wore them out about 3 months ago.
 
E

EpiKk3

New Member
Jun 4, 2004
405
0
0
Nov 14, 2004
#17
  • Nov 14, 2004
  • #17
how do spacers wear out?
 
H

HazMat404

Founding Member
May 24, 2002
1,749
0
36
Nov 14, 2004
#18
  • Nov 14, 2004
  • #18
think he meant the tires
 
E

EpiKk3

New Member
Jun 4, 2004
405
0
0
Nov 14, 2004
#19
  • Nov 14, 2004
  • #19
oh duh lol sorry im outa it
 
J

jwater7

New Member
Oct 9, 2004
104
0
0
Nov 15, 2004
#20
  • Nov 15, 2004
  • #20
Black Stampede said:
That is totally irrelevent. The problem he had was do to his human error (no offense hazmat) NOT the spacers problem. If you are worried about stuff like that why dont you get all paranoid about a terrorist blowing your car up too while you're at it.
Click to expand...

The terrorists are coming, the terrorists are coming...run for your lives!

Dude, it's not a big deal. Everyone has his right to an opinion, and to share his experiences. I personally, had some issues with rears spacers. They seemed to loosen up fairly frequently (frequently, I mean every few months). But, if you're careful to simply keep an eye on them (or you frequently change tires), go for it.

HazMat404: I like the rice eater, that's awesome.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Wheel Spacers?
  • StangSims39
  • Jun 21, 2012
  • SN95 4.6L Mustang Tech
Replies
3
Views
1K
SN95 4.6L Mustang Tech Jun 22, 2012
mransr
  • Locked
1965 Mustang Fastback
  • dodgestang
  • Dec 15, 2009
  • Classic Mustangs For Sale
Replies
0
Views
8K
Classic Mustangs For Sale Dec 15, 2009
dodgestang
Part Number
  • MehakGT
  • Jul 20, 2005
  • 1994 - 1995 Specific Tech
Replies
6
Views
599
1994 - 1995 Specific Tech Jul 20, 2005
BDAWK2002
where to get good floor mats
  • Mustangless
  • Jul 30, 2005
  • 1994 - 1995 Specific Tech
Replies
6
Views
689
1994 - 1995 Specific Tech Jul 31, 2005
HISSIN50
  • Locked
03/04 Cobra Part out Black & Torch Red
  • 2003snake
  • Feb 27, 2010
  • Interior Exterior Parts
  • 8 9 10
Replies
196
Views
43K
Interior Exterior Parts Feb 21, 2012
prudy
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?