• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

is my a4ld sorta messed up or it suppoed to do this?

  • Thread starter Thread starter Foxfan88
  • Start date Start date Dec 5, 2004

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Dec 5, 2004
#1
  • Dec 5, 2004
  • #1
My car runs real solid, but the trans does this thing.

ok say if i drive like regular neighborhood or city driving, going pretty slow from the start my trans shifts at like 2500 or so.

If i start from a stop a little faster, it wont shift until like 3-4000.

And if i punch it from a stop it will go really high. I never kept the pedal down past 4500-5000, dont want to redline on accident, i dont know if will shift up there or not.

Are the a4lds made like this or is it old and screwed up and slips alot?

Also here is a question, not really lated to the trans.
If i floor it on the stang, not using alot of foot pressure, it wont really kick in and drive quicker. but if a really put force on the pedal it starts kicking in.

Say if i'm going like 45mph and it push the pedal all the way in( not like all my force on it) it wont really raise the rpms like 2-500. But if a push real hard with my foot. It w start going fast.

Any help?
 

bhuff30

Founding Member
Dec 11, 2001
6,037
35
129
Olathe KS
Dec 5, 2004
#2
  • Dec 5, 2004
  • #2
Mine would shift automatically at 4500-5000 with the pedal on the floor. If your doesn't shift by a little after 5000, there is probably something a little out of adjustment. No big deal though.
Say if i'm going like 45mph and it push the pedal all the way in( not like all my force on it) it wont really raise the rpms like 2-500. But if a push real hard with my foot. It w start going fast.
Click to expand...
You are talking about the kickdown cable. The point in the pedal where the kickdown cable is engauged is adjustable, and it sounds like yours is a little out of adjustment. You can adjust it under the hood on the throttle linkages. There is a black cable going from the throttle linkage to the transmission. When the pedal is pushed all the way, it should move. You pull up on the clip, and then you can adjust it.
 
P

Pro-Hawk

New Member
Dec 4, 2003
971
0
0
West Texas
Dec 5, 2004
#3
  • Dec 5, 2004
  • #3
bhuff30 said:
Mine would shift automatically at 4500-5000 with the pedal on the floor. If your doesn't shift by a little after 5000, there is probably something a little out of adjustment. No big deal though.

You are talking about the kickdown cable. The point in the pedal where the kickdown cable is engauged is adjustable, and it sounds like yours is a little out of adjustment. You can adjust it under the hood on the throttle linkages. There is a black cable going from the throttle linkage to the transmission. When the pedal is pushed all the way, it should move. You pull up on the clip, and then you can adjust it.
Click to expand...

Hey Buff I'm not sure if this has anything to do with it but what about the Valccum regulater deal? I had a small problem with mine awhile back but it didn't give me this much grief.

Just a thought on top of the kick down cable.
 

Stinger

Founding Member
Jul 7, 2001
7,754
24
118
Basehor (Kansas City), KS
Dec 5, 2004
#4
  • Dec 5, 2004
  • #4
Sounds like it's working normal to me...

Don't you think if you floor it and try to "haul ass" the trans is going to wait until a higher rpm to shift?
 
P

prehall

New Member
May 30, 2004
30
0
0
Dec 7, 2004
#5
  • Dec 7, 2004
  • #5
thats what i was going to say stinger...i mean it all depends how much throttle your giving it...you dont expect it to shift at 2000 with your foot all the way down would you? that wouldnt make it a fun car to drive...

i have the same problem with throttle response too though...barely let into it and it starts losing mph...strange...ill take your guys's advice
 

stang2.3t

New Member
Jun 25, 2004
74
0
0
Spokane Washington
Dec 8, 2004
#6
  • Dec 8, 2004
  • #6
My convert did the same thing. It is pretty much normal. The only way to fix that problem is to replace it with a T5
 
8

89' RICE COOKER

New Member
Mar 3, 2003
325
0
0
Po-town Oregon
Dec 8, 2004
#7
  • Dec 8, 2004
  • #7
it's probably more the motor than the tranny. That's what happens when you only have 88hp.
 

Stinger

Founding Member
Jul 7, 2001
7,754
24
118
Basehor (Kansas City), KS
Dec 8, 2004
#8
  • Dec 8, 2004
  • #8
No, that's what happens when you own an auto...
 

kiddiccarus

The first widely accepted Tranny
20+ Year Stangneter
Dec 24, 2003
1,789
1,051
143
30 Mins from a Ragged GT
Dec 8, 2004
#9
  • Dec 8, 2004
  • #9
Foxfan88 said:
My car runs real solid, but the trans does this thing.

ok say if i drive like regular neighborhood or city driving, going pretty slow from the start my trans shifts at like 2500 or so.

If i start from a stop a little faster, it wont shift until like 3-4000.

And if i punch it from a stop it will go really high. I never kept the pedal down past 4500-5000, dont want to redline on accident, i dont know if will shift up there or not.

Are the a4lds made like this or is it old and screwed up and slips alot?

Also here is a question, not really lated to the trans.
If i floor it on the stang, not using alot of foot pressure, it wont really kick in and drive quicker. but if a really put force on the pedal it starts kicking in.

Say if i'm going like 45mph and it push the pedal all the way in( not like all my force on it) it wont really raise the rpms like 2-500. But if a push real hard with my foot. It w start going fast.

Any help?
Click to expand...

I have a 93 Auto Mine does the exact same thing, this is perfectly normal. When i get on the expressway at night, I will hit about 5500 before it shifts. Dont worry about it, just save money for the T-5 swap.
 

fordman54935

Member
Jan 10, 2003
301
0
16
Wisconsin
Dec 9, 2004
#10
  • Dec 9, 2004
  • #10
I'd say to try putting a new vacuum modulator on it at least. They only cost about $10, they take 5 minutes to replace, and are a good maintance item if you've never replaced it before. I was having shifting issues with my A4LD and a new modulator made it good as new.
 
You must log in or register to reply here.

Similar threads

M
warmed up, hard re-starting on hot days
  • michaelleewebb
  • Mar 26, 2026
  • SN95 V6 Mustang Tech
Replies
9
Views
273
SN95 V6 Mustang Tech Mar 29, 2026
michaelleewebb
M
S
idles perfect then jolts and cuts out when put into Reverse or Drive.
  • shanesstangs
  • Mar 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
224
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
General karthief
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
232
Other Auto Tech Jul 13, 2026
General karthief
Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
274
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
276
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?