Is the prochamber really worth the extra $

mwall1382 · Nov 12, 2004

Currently i have a magnaflow cat-back and im in the market to replace the stock H. But is the MAC prochamber really worth the $200. Plus ill need to get a set of MIL's on top of that. Im lookin for a deep growl/rhaspy sound and a obnocious (sp) WOT sound.......

Slider · Nov 12, 2004

Not IMO. I have it, don't get me wrong it makes power, but I think that the money would be better spent on a magnaflow or Dr. Gas X pipe that are made out of quality metal. My PC is cheap steal with a protective coating. The coating wore off all the welds and is rusting. It has done well for me, but if I had to do it again I would have bought something different.

mity2 · Nov 12, 2004

what slider has said is unfortunatly true. My Prochamber does make noticeble power above 3500RPM, but quality of material is some what disappointment to me. I have coated with header paint(few coats), and so far everywhere else except weld is rust free. Weld developped miner serface rust. Nothing bad, but considering I don't drive my car in rain, I must say that rust is disappointing. But sound it makes with Magnaflow is something else tho. i even get complment from Chevy and Pontiac monkeys. I have my PC off right now and have stock H on, to get my car serviced, and let me tell you, magnaflow makes our car sound mean. But you just wait until you put PC on. Very unique, yet unmistakeblely Mustang. I had BBK X pipe on befor, and hated it. I would recommend PC to everyone, except one lives in northern region where they drive car in winter

GreekStang85 · Nov 12, 2004

the prochamber sounds awesome with my magnapacks, it has a nice rumble when you drive off normal, when you floor it its a whole different story it sounds amazing.

01BlkGT · Nov 12, 2004

I have the prochamber as well and if it means anything, I would go with Dr. gas or the Magnaflow x-pipe instead. Love the sound, makes good power, really dont care about the rust b/c it would take many many many years for it to cause any damage. There are plenty of guys selling their PC at various forums so you can pick one up cheap. Heck if you had LT's, then I would consider selling you mine

98stangv8 · Nov 12, 2004

I love my prochamber...love the sound, don't care about the discoloration...no rust though...wouldn't go with anything else..

madmatt · Nov 12, 2004

I love mine, it was worth it to me because of the sound alone. I love it, and noticed a great gain above 3000 RPM so I like it. If you want every last hp, then get something else. Just my 2 cents.

allwhitestang · Nov 13, 2004

how does the prochamber sound with the flowmasters? and how is the performance with it????

mcmmotorsports · Nov 13, 2004

allwhitestang said:
how does the prochamber sound with the flowmasters? and how is the performance with it????

www.mustangexhaust.com

madmatt · Nov 13, 2004

allwhitestang said:
how does the prochamber sound with the flowmasters? and how is the performance with it????

The sound is absolutely amazing, the performance, well, expect to lose some low end torque and gain a lot of hp above 3 grand. I miss the torque, but love the sound. Car just seems to rev more freely now, but maybe thats just me.

Pitch Black · Nov 13, 2004

IMO NO. Tim at Modular Powerhouse dyno tested a Pro Chamber on a GT to find that it offers almost no performance gains. As for sound, I think an ordinary O/R H-pipe sound much better. So....NO

blue46gt · Nov 13, 2004

I have the Mac offroad h-pipe with 40 series flowmasters. Sounds awsome and is really loud. I put some high temp paint on it and have had no problems with rust at all. Only $120 too!

Pitch Black · Nov 14, 2004

blue46gt said:
I have the Mac offroad h-pipe with 40 series flowmasters. Sounds awsome and is really loud. I put some high temp paint on it and have had no problems with rust at all. Only $120 too!

MAC O/R H all the way! I've got one with MAC Flowpaths and its orgasmic

98stangv8 · Nov 14, 2004

allwhitestang said:
how does the prochamber sound with the flowmasters? and how is the performance with it????

I honestly thought it was too loud and didn't like it on my car...

Tunez4523 · Nov 14, 2004

Wow, I'd have totally disagree with the popular opinions here. I love mine and by the sound, I am guessing that most here have the older PC and not the newer style with the heavier black coating.

98stangv8 · Nov 14, 2004

Tunez4523 said:
Wow, I'd have totally disagree with the popular opinions here. I love mine and by the sound, I am guessing that most here have the older PC and not the newer style with the heavier black coating.

yeah..mine is the old style..whitish in color...

53BigDog · Nov 14, 2004

allwhitestang said:
how does the prochamber sound with the flowmasters? and how is the performance with it????

That is my set up. I love the sound, quiet at idle, screaming like a v on prom night when you get up on it.

mity2 · Nov 14, 2004

Tunez4523 said:
Wow, I'd have totally disagree with the popular opinions here. I love mine and by the sound, I am guessing that most here have the older PC and not the newer style with the heavier black coating.

mine is. still iner rust on weld...

Is the prochamber really worth the extra $

mwall1382

New Member

Slider

mity2

I like Pro3 and all I got was this crappy CT.

GreekStang85

Member

01BlkGT

98stangv8

Active Member

madmatt

Ellis Juan sympathizer

allwhitestang

New Member

mcmmotorsports

Member

madmatt

Ellis Juan sympathizer

Pitch Black

New Member

blue46gt

New Member

Pitch Black

New Member

98stangv8

Active Member

Tunez4523

New Member

98stangv8

Active Member

53BigDog

Active Member

mity2

I like Pro3 and all I got was this crappy CT.

Similar threads

Is the prochamber really worth the extra $

New Member

I like Pro3 and all I got was this crappy CT.

Member

Active Member

Ellis Juan sympathizer

New Member

Member

Ellis Juan sympathizer

New Member

New Member

New Member

Active Member

New Member

Active Member

Active Member

I like Pro3 and all I got was this crappy CT.

Similar threads

Privacy & Transparency

Privacy & Transparency